Sorry, this item is temporarily out of stock.

XJX-134 MT6701 MT6701CT Magnetic Encoder Evaluation Kit 42-Stepper Motor PWM Control Module

New

6 150,30 Ft

Would you like us to let you know when it's back?

Kosárba

Leírás és részletek

Összefoglaló

IIC Communication: JP1 is the IIC communication port. For IIC communication, short-circuit VDD and Z on JP2 and pull them high.
ABZ Communication: JP2 is the ABZ communication port, with default values of AB = 256 and Z = 4. (Note: JP1's MODE pin must be short-circuited to GND.)
PWM Output: JP3 is the PWM output port, with the default PWM frequency set to 994.4. Short-circuit JP1's MODE pin to GND and pull it low.
SSI Communication: JP2 supports SSI communication. Wiring is as follows: Z connects to CSN, B connects to CLK, A connects to DO, and MODE shorts to VDD.
Stepper Motor Magnetic encoder

XJX-134 MT6701 MT6701CT Magnetic Encoder Evaluation Kit 42-Stepper Motor PWM Control Module leírása

IIC Communication: JP1 is the IIC communication port. For IIC communication, short-circuit VDD and Z JP2 and pull them high.
ABZ Communication: JP2 is the ABZ communication port, with default values of AB = 256 and Z = 4. (Note: JP1's MODE pin must be short-circuited to GND.)
PWM Output: JP3 is the PWM output port, with the default PWM frequency set to 994.4. Short-circuit JP1's MODE pin to GND and pull it low.
SSI Communication: JP2 supports SSI communication. Wiring is as follows: Z connects to CSN, B connects to CLK, A connects to DO, and MODE shorts to VDD.

Model:XJX-134
Chip Model: MT6701
JP1: IIC
JP2: ABZ Output (AB: 256, Z: 4)
JP3: PWM: 971.1Hz
Color:Black
Material:PCB

Package Contents:
1 * Magnetic encoder
1 * Magnet
1 * pin