ZK-10022 CNC Step-Down Adjustable Regulated Power Supply Constant Voltage and Constant Current Module Upgrade B
Raktáron
Ezért fogod szeretni az OnBuy-on való vásárlást:
- Szerezz Cashback pénzvisszatérítést minden vásárlás után, és költsd el azonnal a következő rendelésnél.
- Ingyenes kiszállítás – több millió termékre az oldalon
- Vásárlóink elégedettek velünk, már 127,000 Kiváló értékelést kaptunk!
Az OnBuy-on értékesített termékek ára tartalmazza az áfát.
Kamatmentes fizetési lehetőségek elérhetők
Teljes termékleírás és részletek megtekintése
Kézbesítés: Normál (Ingyenes) | pén 26. jún. - sze 1. júl.
Eladó: Papishop
Visszaküldés: 30 nap
180 napos fizetési védelem
Összefoglaló
- Input undervoltage protection (LUP): 11-125V adjustable, factory default value 11V
- Output overvoltage protection (OUP): 1-130V adjustable, factory default value 130V
- Output overcurrent protection (OCP): 0.01-23A adjustable, factory default value 23A
- Output over-power protection (OPP): 1-1500W adjustable, factory default value 1500W
- Over-temperature protection (OTP): 30-99℃ adjustable, factory default value 60℃
ZK-10022 CNC Step-Down Adjustable Regulated Power Supply Constant Voltage and Constant Current Module Upgrade B leírása
Input undervoltage protection (LUP): 11-125V adjustable, factory default value 11V
Output overvoltage protection (OUP): 1-130V adjustable, factory default value 130V
Output overcurrent protection (OCP): 0.01-23A adjustable, factory default value 23A
Output over-power protection (OPP): 1-1500W adjustable, factory default value 1500W
Over-temperature protection (OTP): 30-99 adjustable, factory default value 60
Overtime protection (OHP): 1 minute-99 hours and 59 minutes, factory default is off
Over capacity protection (OAH): 0.001-9999Ah, factory default is off
Over protection (OPH): 0.001-4000KWh, factory default is off
Precautions:
1. AC power cannot be input, let alone 220V mains power.
2. The maximum allowable input voltage is 140V. Overvoltage input or reverse polarity cannot be allowed.
3. The output cannot be completely guaranteed to prevent backflow. When connecting the battery, ensure that the output voltage of the power module is always higher than the battery voltage, or connect a diode in series with the positive terminal of the output to prevent one-way conduction. Prevent battery voltage from flowing back and burning the power supply.
4. When connecting the output terminal to the battery, be careful not to reverse the positive and negative poles.
5. The product is a step-down module, the maximum output voltage = input voltage * 0.95-1V.
Type:B:Single Board
Colour:As Shown
Material:ABS
Package Contents:
1 * CNC step-down module
Részletek
| OPC | PV88GP2 |
|---|---|
| Márka | Typecat |
| Kódok | 4713519377148 (EAN) |
Termékadatok
| Height | 5cm |
|---|---|
| Width | 10cm |
| Length | 15cm |
| Weight | 0.2675kg |
| Colour | As Shown |
| Size | Single Board |
| Material | ABS |
Eladók összehasonlítása: ZK-10022 CNC Step-Down Adjustable Regulated Power Supply Constant Voltage and Constant Current Module Upgrade B
- Új innen 12 071,94 Ft
| Eladó | Értékelések | Garancia | Visszaküldések | Ár | Kiszállítás | Összesen | Mennyiség |
|---|---|---|---|---|---|---|---|
|
Feladás helye:
|
(408 értékelés) | - |
30 nap
Ingyenes visszaküldés Nem
|
12 071,94 Ft
|
+Free Delivery
Várható szállítás:
26 jún. - 1 júl.
|
12 071,94 Ft
|
Vásárlás közben is keressen pénzt azonnali Cashback-kel minden termékre.
Nincs apróbetűs rész, nincs költség
- Jóváírva az OnBuy-fiókján
- Költse el a következő vásárlásán
- Gyűjtse vagy vegye fel
Legyen Cashback VIP-tag
Már egyetlen vásárlással is nagyobb kedvezményeket és jobb árakat érhet el