2in1 Door Handle Shelf Pin Drilling Guide Jig Wood

2in1 Door Handle Shelf Pin Drilling Guide Jig Wood Description

Time-consuming and laborious marking of dimensions.
Punching offset/oblique holes, wasting the board.
Inaccurate scale results in work errors.
Distance between ordinary handle mounting holes: The distance between handle holes is 64/128/192mm, and the center hole can be used for single hole handles. The edge distance setting is 37/50/64mm

Accurate positioning, simple and fast drilling: simple operation with alignment angle
The fixed hole diameter of the drill bit is available in two sizes: 5mm and 6.25mm drill sleeves. The mold steel guide drill sleeve is and
3-6MM hinge offset: suitable for 3mm/4mm/5mm/6mm hinge offset
Easy to install and use: First, adjust the drilling depth with a small wrench and lock the limit ring. Lock the fixture and start drilling
Please note: the physical slightly color difference or difference, does not affect the use, please do not mind, thank you!
Colour:Red
Material:Aluminum alloy
Type: B: Hinge punch kit

Package Contents:
1x Hole Puncher set

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.