4-in-1 Soil Tester - Atyhao - Moisture - Temperature - pH - Light

4-in-1 Soil Tester - Atyhao - Moisture - Temperature - pH - Light Description

Features: 1. Four-in-one soil tester; can be used to test soil moisture, temperature, light, and pH. 2. Determines whether plants are receiving sufficient light and whether the soil pH is suitable by measuring soil moisture and temperature. 3. Helps maintain optimal soil conditions in gardens or lawns, promoting healthy plant growth. 4. If the soil being tested is too dry or too fertile, and an accurate pH reading cannot be obtained, gently water the soil and measure again after half an hour. 5. Easy to use: Insert the probe vertically into the center of the plant stem and gently push it into the soil, avoiding damage to the plant. 6. Suitable for gardens, lawns, farms, indoor and outdoor plants, fruits, vegetables, flowers, trees, shrubs, etc. Specifications: Condition: 100% Brand New Product Type: Soil Tester Material: PP Accuracy: 0.1 Weight: Approx. 155 g / 5.5 oz Length: Approx. 31.5 cm / 12.4 inches Battery Attributes: 1 x 9V 350MAH battery (battery not included) Instructions for Use: Before use, please install the battery (battery not included) and remove the protective cap from the probe. 1. Light Measurement A. Press the ON button to turn on the instrument. B. Point the light sensor window at the strongest light source. C. The current light intensity will be displayed on the LCD screen. Note: Do not block the light or create shadows on the light sensor. 2. pH Measurement Range A. Set the pH/C button on the back to the PH position. B. Insert the probe vertically into the soil; testing should be performed as soon as possible.

C. Press the ON button to start the measurement.

D. The measured pH value will be displayed on the LCD screen.

E. Take multiple measurements to obtain the desired accurate value.

Note:

1) Insert the probe vertically into the middle edge of the plant stem.

2) Insert it gently into the soil to avoid damaging the probe.

3) If the soil being tested is too dry or fertile and the pH value cannot be accurately measured, the user can water it and measure again after half an hour.

Soil pH classification: 4.5 is extremely acidic, 4.5-5.5 is strongly acidic, 5.5-6.5 is acidic, 6.5-7.5 is neutral, 7.5-8.5 is alkaline, 8.5-9.5 is strongly alkaline, and 9.5 is extremely alkaline.

3. Soil Moisture Measurement

A. Set the pH/C button on the back to the C position.

B. Insert the probe into the soil as vertically as possible.

C. Press the ON button to start the measurement.

D. The soil moisture content will be displayed on the LCD screen.

Package List:

1 x Soil Tester (batteries not included)

1 x Instruction Manual

Note:

1. Please allow 0-1 inch error due to manual measurement. Thank you for your understanding. 2. Due to different monitor calibration methods, the color of the item shown in the photo may be slightly different from the actual product. Please refer to the actual product.