700ml Wall Mounted Automatic Soap Dispenser

700ml Wall Mounted Automatic Soap Dispenser Description

Whether you're cooking with raw ingredients or just finished in the bathroom, we all know the importance of washing our hands. What's not so obvious is how we can spread germs in the process of cleaning up. When you touch the handle of your tap or the nozzle of a bottle of hand sanitiser with your dirty hands, you can inadvertently transfer germs onto them, where they can wait for you to pick them up later. But thanks to the 700ml Wall Mounted Automatic Soap Dispenser, you'll never have to worry about lurking hygiene disasters again! This soap dispenser uses an infra-red motion sensor to release the soap from the machine. Simply hold your hand under the machine and 1 millilitre of soap is delivered into the palm of your hand. The sensor's range is 10 centimetres. This sweet spot means you won't have to hold your hand directly under the nozzle before it registers, but you won't set it off accidentally, either. Attaching this soap dispenser to your wall is a simple task. Its backboard can be removed, letting you use it as a template for drilling holes in your kitchen or bathroom walls. Once you've fastened the backplate to the wall using a set of screws, you can simply snap the soap dispenser back onto the backplate, load it up with soap and you're ready to go! The 700ml Wall Mounted Automatic Soap Dispenser not only looks like something from the future, its resilient design will make sure it reaches that point. Its tough ABS plastic construction won't rust or rot, and its high-quality pump head has proven to stay leak free even after 300,000 uses. This Wall Mounted Automatic Soap Dispenser is all about preventing waste. Holding your hand under the sensor gives you just the right amount of soap to clean your hands and not a drop more, saving you money and reducing plastic waste from liquid soap containers. It's super energy efficient, too: It'll keep running off 4 AA batteries for up to a year. To give your household maximum protection from bacteria and other microbes, add this Wall Mounted Automatic Soap Dispenser to your basket today. How to use the Wall Mounted Automatic Soap Dispenser: The first time you use the Wall Mounted Automatic Soap Dispenser, activate it several times to pump any trapped air out of the system. Use only non-foaming liquid soap or hand sanitiser. Do not use alcohol gel or any other chemical disinfectant. For indoor use only. Do not expose the IR sensor to strong, direct sunlight, as this can damage the sensor over time. This product is not waterproof. Do not soak it in water or run it under a flow of water. To clean the device and prevent clogging, fill the soap receptacle with warm water and activate the sensor several times until the water runs clear. Specification: Dimensions: W10 x L11 x H16.5cm Weight: 400g Capacity: 700ml Material: ABS plastic Sensor range: 10cm Batteries: Requires 4 x AA batteries (not included) Manufacturer's description: Product description Wall Mounted Touchless Automatic Soap Dispenser You'll find your kids and you love to wash hands with this product, reminding you to wash your hands. Features: Touchless, infrared sensor, 0.2-second activation, 0.8~1ml per activation 700ml large capacity suitable for commercial public places & household use Wall mounted to save space and lock design for easy maintenance Non-drip design and convenient battery-powered design Much fun to help kids build hand washing habits Read before Installation: * Keep sensor area and battery compartment dry and clean. * The range of sensor action below the sensor is 0-4in(0-10cm). * First time use, operate the dispenser several times to pump the air out * Don't use alcohol or other chemical liquids.Use non-granular, non-foaming liquid soap or hand sanitizer * Don't install the dispenser under the table less than 2 inches (5 cm) in height,(Install the dispenser 40CM/15inch above the table top recommended) * For indoor use only. Mirror surface, direct sunlight, strong direct light, or reflection & strong light can damage the product's infrared sensor. * Low Battery Indication-LED lights blinks fast to remind you to change new batteries. When no use for a long time, empty the soap and take out the batteries. * Not waterproof, don't soak this unit in the water over the rise base and don't flush it with strong flowing water. * Maintenance-Clean the outlet regular to avoid clogging, filling warm water and operate several times. Specifications: Material: ABS Capacity: 700ml Sensor Range