Product Images
Sorry, this item is temporarily out of stock.
AD5693R Breakout Board I2C Interface 16-Bit DAC Module Compatible with STEMMA QT Qwiic
Brand Torribaly
New
Similar Products we think you'll like
Hot
Hot
Would you like us to let you know when it's back?
Description & Details
Summary
- The AD5693R breakout board is a 16-bit DAC with an I2C interface and a temperature compensated 2.5V internal reference for compact, high-precision output.
- We broke out the ADDR/A0 pin so you can connect two DACs on one I2C bus by simply pulling the A0 pin high (or closing the jumper on the back) to prevent conflicts. A 6-pin header is also included for breadboarding. Will work with either 3.3V or 5V logic, and you can set the output maximum to either 2.5V or 5V (2xVref). If you're powering with 3.3V, you'll be able to set the output range to either 2.5V or Vin.
- We have an easy to use for Arduino library and tutorial with a sine wave output example that will work with nearly any microcontroller or microcomputer with an I2C host.
- Comes with a little 0.1inch standard header in case you want to use it with a breadboard or perfboard. Four mounting holes for easy mounting. There is an optional 3.5mm terminal block spot on the PCB - we don't include 3.5mm terminal blocks, but they are common and in stock in the shop - you can solder in place if you wish.
- To get you started quickly, we designed a custom PCB in the STEMMA QT form factor to make it easy to connect. The STEMMA QT connectors on both sides are compatible with the Qwiic I2C connector. This allows you to make solderless connections between the board and the AD5693R, or link it with a variety of other sensors and accessories using compatible cables.
AD5693R Breakout Board I2C Interface 16-Bit DAC Module Compatible with STEMMA QT Qwiic Description
The AD5693R breakout board is a 16-bit DAC with an I2C interface and a temperature compensated 2.5V internal reference for compact, high-precision output.
We broke out the ADDR/A0 pin so you can connect two DACs one I2C bus by simply pulling the A0 pin high (or closing the jumper the back) to prevent conflicts. A 6-pin header is also included for breadboarding. Will work with either 3.3V or 5V logic, and you can set the output maximum to either 2.5V or 5V (2xVref). If you're powering with 3.3V, you'll be able to set the output range to either 2.5V or Vin.
We have an easy to use for library and tutorial with a sine wave output example that will work with nearly any microcontroller or microcomputer with an I2C host.
Comes with a little 0.1inch standard header in case you want to use it with a breadboard or perfboard. Four mounting holes for easy mounting. There is an optional 3.5mm terminal block spot the PCB - we don't include 3.5mm terminal blocks, but they are common and in stock in the shop - you can solder in place if you wish.
To get you started quickly, we designed a custom PCB in the STEMMA QT form factor to make it easy to connect. The STEMMA QT connectors both sides are compatible with the Qwiic I2C connector. This allows you to make solderless connections between the board and the AD5693R, or link it with a variety of other sensors and accessories using compatible cables.
Colour:Black
Material:ABS
Package Contents:
1x AD5693R Breakout Board
1x 5PIN
Details
| OPC | PVP8TSW |
|---|---|
| Brand | Torribaly |
| Codes | 6032294230065 (EAN) |
Product Data
| Height | 1cm |
|---|---|
| Width | 2cm |
| Length | 3cm |
| Weight | 0.002kg |
| Colour | Black |
| Material | ABS |
Would you like us to let you know when it's back?
AD5693R Breakout Board I2C Interface 16-Bit DAC Module Compatible with STEMMA QT Qwiic
New
You might also like
Hot
Hot