AD5693R Breakout Board I2C Interface 16-Bit DAC Module Compatible with STEMMA QT Qwiic

Brändi Torribaly
Uusi

Varastossa

Miksi tulet rakastamaan ostoksia OnBuyssa:

  • Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
  • Ilmainen toimitus – miljooniin tuotteisiin sivustolla
  • Asiakkaat rakastavat meitä – 128,000 arvostelua arvosanalla “Erinomainen”

Katso koko tuotekuvaus ja tiedot

30,33 €
+4,12 € Toimitus
1% Mitä on välitön Cashback? Lue lisää
Lisää koriin

OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.

Korottomat maksuvaihtoehdot saatavilla

Katso koko tuotekuvaus ja tiedot

Toimitus: Vakio (4,12 €) | ti 14. - la 18. heinä

Myyjä: JJBRDZ

Palautukset: 30 päivää

180 päivän maksuturva

Lisää koriin
Kuvaus ja tiedot

Yhteenveto

  • The AD5693R breakout board is a 16-bit DAC with an I2C interface and a temperature compensated 2.5V internal reference for compact, high-precision output.
  • We broke out the ADDR/A0 pin so you can connect two DACs on one I2C bus by simply pulling the A0 pin high (or closing the jumper on the back) to prevent conflicts. A 6-pin header is also included for breadboarding. Will work with either 3.3V or 5V logic, and you can set the output maximum to either 2.5V or 5V (2xVref). If you're powering with 3.3V, you'll be able to set the output range to either 2.5V or Vin.
  • We have an easy to use for Arduino library and tutorial with a sine wave output example that will work with nearly any microcontroller or microcomputer with an I2C host.
  • Comes with a little 0.1inch standard header in case you want to use it with a breadboard or perfboard. Four mounting holes for easy mounting. There is an optional 3.5mm terminal block spot on the PCB - we don't include 3.5mm terminal blocks, but they are common and in stock in the shop - you can solder in place if you wish.
  • To get you started quickly, we designed a custom PCB in the STEMMA QT form factor to make it easy to connect. The STEMMA QT connectors on both sides are compatible with the Qwiic I2C connector. This allows you to make solderless connections between the board and the AD5693R, or link it with a variety of other sensors and accessories using compatible cables.

AD5693R Breakout Board I2C Interface 16-Bit DAC Module Compatible with STEMMA QT Qwiic Kuvaus

The AD5693R breakout board is a 16-bit DAC with an I2C interface and a temperature compensated 2.5V internal reference for compact, high-precision output.
We broke out the ADDR/A0 pin so you can connect two DACs one I2C bus by simply pulling the A0 pin high (or closing the jumper the back) to prevent conflicts. A 6-pin header is also included for breadboarding. Will work with either 3.3V or 5V logic, and you can set the output maximum to either 2.5V or 5V (2xVref). If you're powering with 3.3V, you'll be able to set the output range to either 2.5V or Vin.
We have an easy to use for library and tutorial with a sine wave output example that will work with nearly any microcontroller or microcomputer with an I2C host.
Comes with a little 0.1inch standard header in case you want to use it with a breadboard or perfboard. Four mounting holes for easy mounting. There is an optional 3.5mm terminal block spot the PCB - we don't include 3.5mm terminal blocks, but they are common and in stock in the shop - you can solder in place if you wish.
To get you started quickly, we designed a custom PCB in the STEMMA QT form factor to make it easy to connect. The STEMMA QT connectors both sides are compatible with the Qwiic I2C connector. This allows you to make solderless connections between the board and the AD5693R, or link it with a variety of other sensors and accessories using compatible cables.

Colour:Black
Material:ABS

Package Contents:
1x AD5693R Breakout Board
1x 5PIN

Tiedot

OPC PVP8TSW
Brändi
Torribaly
Koodit 6032294230065 (EAN)

Tuotekuvat

AD5693R Breakout Board I2C Interface 16-Bit DAC Module Compatible with STEMMA QT Qwiic 1
AD5693R Breakout Board I2C Interface 16-Bit DAC Module Compatible with STEMMA QT Qwiic 2
AD5693R Breakout Board I2C Interface 16-Bit DAC Module Compatible with STEMMA QT Qwiic

Tuotetiedot

Height1cm
Width2cm
Length3cm
Weight0.002kg
ColourBlack
MaterialABS

Vertaile myyjiä tuotteelle AD5693R Breakout Board I2C Interface 16-Bit DAC Module Compatible with STEMMA QT Qwiic

  • Uusi alkaen 34,45 €
Myyjä Arviot Takuu Palautukset Hinta Toimitus Yhteensä Määrä
Lähetetty varastolta: China
(439 arvostelua)
-
30 päivää
Ilmaiset palautukset Ei
30,33 €
+4,12 € Delivery
Arvioitu toimitus: 14-18 heinä
34,45 €
Lisää koriin

Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.

Ei koukkuja, ei kuluja

  • Maksetaan OnBuy-tilillesi
  • Käytä se seuraavaan ostokseesi
  • Säästä se tai nosta se

Ryhdy Cashback VIP -jäseneksi

Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset

×

Odota! Jätit jotakin
taaksesi...

Saat välittömän Cashbackin vain OnBuyssa! Syötä sähköpostiosoitteesi alle, niin lähetämme sinulle kopion ostoskoristasi – näin säästät aikaa myöhemmin.

Ei kiitos, olen kunnossa nyt

Syöttämällä sähköpostiosoitteesi liityt automaattisesti tietokantaamme, jolloin saat käyttöösi personoidut Cashback-tarjoukset ja ennakkopääsyn parhaisiin tarjouksiimme. Voit peruuttaa sähköpostiviestimme milloin tahansa, emmekä koskaan jaa tietojasi kenellekään. Lue lisää tutustumalla tietosuojakäytäntöömme ja käyttöehtoihimme.

×

Ennen kuin lähdet...
Muista, että saat välittömän Cashback-hyödyn kaikesta OnBuyssa!

Haluatko saada henkilökohtaisia tarjouksia ja parhaat Cashback-edut? Tilaa uutiskirjeemme alla.

Ei kiitos, kaikki on kunnossa

Voit peruuttaa sähköpostiemme tilauksen milloin tahansa, emmekä koskaan jaa tietojasi kenellekään. Tutustu Tietosuojakäytäntöömme ja ehtoihimme saadaksesi lisätietoja.

Tämä sivu on vanhentunut.

Päivitä sivu jatkaaksesi ostoksia.

Päivitä ja jatka