Geeetech GT2560 3D Printer Motherboard Controller Board Compatible Mega2560

Geeetech GT2560 3D Printer Motherboard Controller Board Compatible Mega2560 Description

Highlights:

Integrated with the powerful functions of the Mega2560 + Ultimaker and the Mega2560 + Ramps 1.4 kit, the GT2560 can not only fully support them in terms of software and hardware, but also features a compact size, more convenient connection, and more stability.

Adopt the ATmega2560 as the main control chip, coupled with the high-performance USB-to-serial converter FT232RQ.

Power Supply: The working voltage is 12V-24V, the dual power supply design powers the heated bed and the logic part separately. The current is 12A for the heated bed and 5A for other parts. The cooling fan can support 12V.

The main circuit adopts an SMD fuse tube, the diode added to the power port can provide reverse protection for the entire circuit. Additionally, the 5V USB is a USB port protected by a 500mA recoverable fuse.

Three 12V fan outputs and one PWM output for LED or other lighting equipment.

Three 55A MOSFETs (with LED indicator, the actual output is limited by the PCB board and connector), the 3 MOSFETs are equipped with a heat sink to ensure sufficient heat dissipation and stable operation.

Supports 5 A4988 stepper drivers (3 for X/Y/Z axes and 2 for extruders); The stepper motor subdivision can be configured by a dial switch, eliminating jumper caps, easier to use.

Three temperature sensor inputs (100K thermistor is recommended)

The extended LCD and SD card interfaces support both LCD2004 and LCD 12864, with which you can print without your PC.

The firmware is the most popular Marlin, known for its stability, user-friendliness, and high quality. performance.

Specifications:

Brand: Geeetech

Type: 3D Printer Motherboard

Model: GT2560

Motor: XH (2.54mm-4pin)

Fan: PH (2.00mm-3pin)

Endstop & Thermistor: XH (2.54mm-2pin)

Product Weight: 80g

Package Weight: 100g

Product Size (L x W x H): 107.3 x 78.7 x 22mm

Package Size (L x W x H): 110 x 80 x 40mm

Package Contents

1 x GT2560 3D Printer Controller Board

1 x User Manual