M.2 2280 SSD PCI-E NVMe Solid State Hard Disk Radiator Cooler

M.2 2280 SSD PCI-E NVMe Solid State Hard Disk Radiator Cooler Description

Description:
While M.2 SSD provides ultra-high read and write performance, it inevitably a serious problem-heating! Its short size collects a lot of heat during the process of reading and writing data. Once the heat is accumulated due to poor heat dissipation, the performance of the SSD be degraded, and the data transmission be lost or even the hard disk be damaged!
In view of this, the M2-TWO radiator that can effectively reduce the temperature of M.2 SSD has been developed, which is easy to install and has a effect.
Feature:
High speed 2010 fan. Maximum air volume: 1.35CFM, in order to avoid taking up too much space inside the chassis, M2-TWO uses a 20 x 20 x 10mm exquisite fan, the speed is up to 14000RPM, although the size is small, the performance is strong

Aluminum alloy heat sink. The heat of the M2 hard disk is conducted to the aluminum alloy heat sink through the thermal grease.
The 2010 high-speed fan blows out the heat quickly to that the hard disk works efficiently and with low noise: 24dBA
Grille shape. The heat sink adopts a grille shape, which increases the heat dissipation area and ensures the smooth flow of the air path, which is convenient for the rapid dissipation of heat. Maximum wind pressure: 4.31mmH2O
Specification:
Model: M.2-TWO
Color: black
Material: plastic
Cooling method: active cooling
Rated voltage: DC12V
Rated current: 0.054A
Input power: 0.65W
Fan speed: 14000RPM
Maximum air volume: 1.35CFM
Maximum wind pressure: 4.31mmH2O
Noise level: 24dBA(MAX)
Application: 2280 solid state drive
Size: 74.5 x 24.5 x 27mm
Net weight: 60g
Note:
This product does not contain a solid state drive, just for the product effect

Package Contents:
1 x Hard Disk Radiator Cooler

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.