Mini4 Audio Mixer Interface DJ Console Bluetooth 5.0 OTG Reverb 48V So

Mini4 Audio Mixer Interface DJ Console Bluetooth 5.0 OTG Reverb 48V So Description

Super mini size, easy to carry and takes up very little space.
Using 5V power supply, convenient for outdoor use and using power bank for power supply.
1,2 channel XLR with separate 48V switch and high impedance function.
Channels 1 and 2 have separate effect switches.
OTG output facilitates connection to PC/smart devices.With Loopback button, you can switch the recording mode.Bluetooth 5.0 enables wireless high-quality playback of lossless music.Ultra-low noise floor, high-quality chip processing audio, the sound is clearer.

High quality microphone amplifier and headphone amplifier.
Equipped with 3.5mm and 6.5mm headphone jacks.
CH1 three-stage equalization is adjustable.
INPUT:
1. Microphone input mode: XLR interface, balanced input, unbalanced input
(type: XLR, electronically balanced, discrete input circuit)
Frequency response range: 20Hz-22KHz1dB
Distortion (T.D&N): 0.01% at +4dB,1kHz,Bandwidth 80 kHz
Signal-to-noise ratio: 90dB A-weighted
Gain range: +10dB-60dB
Input impedance (lmpedance): . 2.60 kΩ balanced
2. Line input: balanced input
(Type: 1/4inch TRS connector electronically balanced)
Frequency response range: 10Hz-60KHz3dB
Distortion (T.D&N): 0.01% at +4dB,1kHz,Bandwidth 80 kHz
Signal-to-noise ratio: 90 dB -weighted
Input impedance (lmpedance): . 20 kΩ balanced, 10 kΩ unbalanced
OUTPUT:
Line output: 6.35mm two-channel and mono output
(Type: 1/4inch TRS connector electronically balanced,1/4inch connector unbalanced)
Output impedance (lmpedance):. 240Ω symm./ 120Ω unbalanced
Plug Type :EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so on.
Voltage: AC100-240V
Colour:black
Material:Metal
Size: 180 x 152 x 40mm

Package Contents:
1 x mixer
1 cord

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.