Motorcycle Turn Signal Light Flasher Switch Double Flash Warning Function Controller for Sprint 150

Motorcycle Turn Signal Light Flasher Switch Double Flash Warning Function Controller for Sprint 150 Description

Double flashes refer to the front and rear direction lights flashing at the same time, playing a warning role. It is a necessary product for night driving, formation travel, rain and fog driving.
Double flash: Four turning lights are flashing at the same time. Use in the evening, rainy day, wind dust, wind and snow, foggy day, group riding or parking to improve safety.

Fitment:For SPRINT 150
Installation:Find the switch plug on the left handle, pull it out and plug it in on both sides.
Function:
1:LED lights and halogen lights can be used. When there is no LED light steering priority, there is also astigmatism on the other side. And it is a fixed flickering frequency.
2. Using high-power solid-state relay, there is no phenomenon that the flasher of the car does not move.
3. With the mode memory function, after the key door is closed in the double flash mode, it is still in the double flash mode when it is opened.
4.The controller adopts microcomputer controller, full chip integrated circuit, and is glued and waterproof
The sequence of the 5 double flash modes is as follows:
1. Left flash followed by right flash
2. Flash together left and right
3. Alternate left and right flashes
4. The breathing light flashes
5. Ordinary double flash
How to use:
1.Turn on the double flash, pull left or right, and then quickly return (not more than 1.5 seconds).
2.Turn off the double flash, pull left or right, and then return quickly (not more than 1.5 seconds).
Note: Some models that support the car's double flash switch do not need this step
Color: As Shown
Material: plastic

Package Contents:
1 x Motorcycle Warning Function Controller

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.