Performance Coilovers Kit for BMW E36 3 Series Saloon Coupe Convertible 1990-99

Performance Coilovers Kit for BMW E36 3 Series Saloon Coupe Convertible 1990-99 Description

Application

For BMW 3 E36 Saloon09/1990-12/1998 

316i 318i 320i 323i 325i 328i 318is 325is 318tds 325tds 325td M3

For BMW 3 E36 Coupe 09/1991-04/1999 

318is 316i 320i 323i 323is 325i 328i 328is M3

For BMW 3 Convertible E36 03/1993-04/1999 

318i 320i 323i 325i 328i M3

For BMW 3 E36 Touring / Estate 08/1994-12/1999 

316i 318i 320i 323i 328i 318tds 325tds

Specifications

Height adjustable: Yes, lowering 25-75mm depending on the vehicle models

Damping adjustable: 24 levels of rebound damping force

Camber adjustable: Available, front only

Spring rate Front: 8 kg/mm (448 lbs/in)

Spring rate Rear: 7 kg/mm (392 lbs/in)

Front spring inner diameter: 70.5 mm

Rear spring inner diameter: 63-66 mm

Spring length Front: 180 mm

Spring length Rear: 183 mm

Front top mounts: pillow ball bearing camber plate

Rear top mounts: pillow ball  

Shock type: Twin tube

Spring Preload: 7-10 mm

Warranty: 2 years 

Package included

2 x Front coilovers
2 x Rear coilovers
2 x C spanners

Feature

1. Lowered height adjustment from 25-75mm (depends on vehicle models) which allows a lower center of gravity and also adds a more aggressive stance 
2.24 levels of adjustable damper -- This allows you the ability to perfectly dial in your coil-overs system. For nice comfortable driving, set damping to full soft. For more spirited driving, set it to 16 clicks. For occasional track days, set it to full stiff.
3. Adjustable pre-load spring tension to reduce the shaking motion to a certain extent
4. Adjustable Camber Plate and Pillow ball top mount for sharpening steering response. ( for some models)
5. CNC machined Aluminum  top mounts and lockers-- - excellent strength, and save weight
6. Heavy Duty Steel Lower Mounts--- Highly Durable & Reliable
7. High tensile spring---  600,000 times continuously test to assure its high tensile strength.
8. All inserts come with fitted long rubber boots--- To protect the damper better and be durable.
9. Twin-Tube structure ---provides excellent handling & control characteristics for most driving conditions
10. Corrosion Finish - Anodized Aluminum And Powder Coated Carbon Steel Parts

Note:

1.  All modifications must be installed by licensed mechanics and in compliance with your local modification regulations.
2.  Please ensure all components are tightened with correct torque specifications (which can be found in the vehicle service manual)before and after installation.  Any loose nuts, bolts, or locks will cause noise.  Do check and tighten before serious problems happen.
3.  Impact wrench is prohibited during the installation, it will loosen or damage the product.
4.  Examine the clearance between tires and suspension.  ( The minimum clearance should be 4mm, otherwise, you need to add wheel spacers.  Caution: It is not sufficient with torsion beam trailing arm axles)
5.  We suggest regular maintenance for the coil-over, spray with some WD40 every 3-4 months will keep it smooth and clean, which helps to extend the lifetime.