Petrol Engine Direct replacement for Honda compatible the 4 stroke GX160 20mm

Petrol Engine Direct replacement for Honda compatible the 4 stroke GX160 20mm Description

Note: Please compare the diameter and length of the crankshaft!!!

Applications:

Direct replacement for Honda compatible the 4 stroke GX160 5.5hp engine

Typical Application for:
Compressor Scarifier Lawnmower Pump Generator Pressure Washer Gokart Lawnmower Cement Mixer Dust Collector Flail Mower

Engine Details:

• Bore & Stroke : 70 x 55 mm

• Maximum Output : 5.5 HP / 4.1 kW

•Rated Output : 4.0 HP / 3.0 KW

• Compression Ratio : 8.5:1

• Engine Type : 168F/ Air Cooled 4 Stroke OHV Single Cylinder

• Displacement: 168 cc

• Starting System : Pullstart

• Fuel Capacity : 3.6 Litres

• Engine Oil Capacity : 0.6 Litre

• Overall Length: 360 mm / 14.17 inches

• Overall Width: 305 mm / 12.01 inches

• Overall Height: 330 mm / 12.99 inches

• Crankshaft length: 250mm (The length of the protruding part is 50mm)

• Crankshaft Ø: 20 mm / 0.79 inch (Not 0.75 inch, Not 3/4'')

• Dimensions (L x W x H): 360 x 305 x 330 mm

• Distance Between Bottom Fixing Holes (Clutch Side, Centre of Eye to Centre of Eye): 165 mm / 6.5 inches

• Distance Between Bottom Fixing Holes (Pullstart Side, Centre of Eye to Centre of Eye): 165 mm / 6.5 inches

• Distance Between Bottom Fixing Holes (Pullstart to Clutch across, Centre of Eye to Centre of Eye): 77.06 mm / 3.03 inches

Features:

• This 4-stroke 5.5 HP petrol engine is a powerful, air-cooled standard engine with a 20 mm shaft and is started by a pulley.

• You can use this engine in numerous devices, such as water pumps, vibratory plates, wood splitters, power generators, but it is also used in karting.

• The gasoline engine is solidly built and also has an oil shortage safety device that switches off the engine if the oil level is too low.

Package?

1x petrol engine

1x board tool for operation and maintenance

1x user manual

Notes:

* please measure your shaft with digital callipers before ordering to make sure you get the right model