Reciprocating Detail Sander,USB Charging Sanding P

Reciprocating Detail Sander,USB Charging Sanding P Description

8 Multifunctional Sanding Heads: Detail sander tool with 8 sading heads: Arc, Right anglr, Spherical, Sledge, Square, Rectangular, Slim and Triangular sanidng head for differnent needs, and ennsures truely stock removal.
3 Speed Adjustable: Mini sander pen with one click operation and 3 speed adjustable:2800rpm/3100rpm/3600rpm. There colorful light effect after acticated and you can DIY reset your own light effect of each speed.
Complete Accessories: Pen sander with a storage box and self adhesive sandper for flat sanding head #180/280/400/600/800/1000/1200 (97pcs)each mesh Pre-cut, Self adhesive sandper for rounded sanding head #180/280/400/600/800/1000/1200 (47pcs)each mesh Pre-cut.
Overload Protection- Intelligent IC chip to protect your tool from overloading. Auto shut off be activated when excessive pressure is detected to save motor and elongate service life.
Long Lasting Use- Requires approximately 20 minutes for charging, with real time display for battery level, 100 minutes of duration time is available when fully and with empty loading.

Reciprocating action: 2.50.1mm
Horizontal reciprocating tolerance: 0.1mm
Osilating tolerance(left/right): 0.1mm
Battery capacity: 280mAh
Output current with load: 750mA max
Output current without load: 250mA max
Rated power: 2.8W
Input voltage: 5V
Output voltage: 3.7V
Input current: 1A
Charging time: 20min
Work duration with load: 100min
Max. pressure: 320g/360g/430g(3 speed)
Sanding speed: 2800rpm/3100rpm/3600rpm(3 speed)
Pen size: 178x21x18mm/7x0.8x0.7in
Pen weight: 55g/1.9oz
Packing List:
1 * Sanding pen
8 * Sanding head
12 * Sheet sanding paper
1 * Charing cable
1 * Storage box
Colour:As Shown
Material:plastic

Package Contents:
1 set x pensander

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.