Stud Finder Wood Studs Metal Detecion Detection Li

Stud Finder Wood Studs Metal Detecion Detection Li Description

Purpose: Quickly locate wood, metal, and AC wires hidden in the walls, floors, and ceilings of a house. It can work in Flat noodles, wallpaper, wood floor, acoustic ceiling, spray painted wall and other places. Prevent you from encountering danger when installing televisions, cabinets, garage racks, etc.
Metal Depth Indicator.
Green Backlight.
Low Voltage Indicator.
Operating Current:Less than 50ma

Function:
The seven functions are:
1. Three pieces of wood with a depth of 0.5 inches
2. Three pieces of wood with a depth of 1 inch
3. Three pieces of wood with a depth of 1.5 inches
4. Metal detection
5. AC power
6. Depth of metal detection
7. Distinguishing whether metals are magnetic or not.
Model:HW-710
Weight:170G
Battery:9V battery (shipped without battery) Battery model: 9V battery 6F22
Shutdown Current:Less than 10UA
Automatic Shutdown Time:3 minutes
1. Detection Mode Selection
Stud Mode:
In stud mode, there are 3 scan modes o choose for properly thick of the scanning surface:
1/2Inch Scan Mode can detect 1/2 in. (13mn) deep.
1Inch Scan Mode can detect 1 in. (25mm)deep.
1 1/2Inch Scan Mode can detect 1 1/2 in.(38mm) deep.
If you don't know the depth of the detection, it is recommended to use 1/2Inch scan mode first. When 1/2Inch scan mode is not detected, use 1Inch or 1 1/2 Inch scan mode instead.
Metal Mode:
The detection of magnetic metal can be as deep as 3.2 in. (80mm)(diameter 15mm galvanized steel tube)
It can detect non-magnetic metals up tc 2.4 in. (60mm) (diameter 13mm copper tube)
AC Mode:
Detect unshielded AC live wire up to 2 in. (51mm) deep.
Colour:As Shown
Material:Plastic

Package Contents:
1 * Stud Finder Wood Studs

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.