Suitable for iPhone 17ProMax OLED LCD hard touch assembly

Suitable for iPhone 17ProMax OLED LCD hard touch assembly Description

Suitable for iPhone 17ProMax1 OLED hard touch LCD assembly. COP process 2. Original thickness 3. 1.1mm assembly 4. 1:1 window 5. Original resolution Precautions before installation Tip 1: Testing before installation Do not remove any protective films or labels during testing. Please pay attention to static electricity. Be sure to wear an ESD (electrostatic discharge) belt before making repairs. This prevents static electricity from damaging the electronic components in the phone. Make sure you wear safety glasses and be careful not to cut your fingers with broken glass. Skill 2: Simulation Test Screen replacement is a very sensitive product. We strongly recommend testing it before installing. Please simulate the test, which means the phone is disconnected (motherboard + LCD or screen) connected to the audio cable and the new device is replaced, turned on and the test is completed. If the test was successful, please install it. If it cannot be displayed, please contact us as soon as possible. And please don't force install in phone. Once the screen is installed, we take no responsibility. Tip 3: Do not bend the cable too much. Please be careful not to bend the LCD cable too much. A bend of more than 90 degrees results in a black display. 1. LCD monitor and touch screen digitizer component spare parts. 2. Replace the old, unusable and damaged parts. 3. Make your device look better than before. 4. Completely suitable for work. 5. Each item has been checked and kept in good condition before shipping. 6. Professional installation is highly recommended. Once the screen is installed, we take no responsibility.