5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi
Disponibile
Perché amerai fare acquisti su OnBuy:
- Ottieni Cashback su ogni acquisto – spendilo subito sul tuo prossimo ordine
- Consegna gratuita – su milioni di articoli in tutto il sito
- I clienti ci amano – 129,000 recensioni con valutazione « Eccellente »
I prezzi degli articoli in vendita su OnBuy includono l’IVA
Opzioni di pagamento a rate senza interessi disponibili
Vedi la descrizione completa e i dettagli del prodotto
Consegna: Standard (4,00 €) | ven 31 lug - mer 5 ago
Resi: 30 giorni
Protezione dei pagamenti per 180 giorni
Riepilogo
- The microphone is a single mono element. You can select whether you want it to be on the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick up two microphones!
- You can set them up to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
- This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
- Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it up! This microphone is best used with Cortex M-series chips like the for Arduino Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
- Microphone Module
Descrizione di 5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi
The microphone is a single mono element. You can select whether you want it to be the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick two microphones!
You can set them to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it ! This microphone is best used with Cortex M-series chips like the for Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
Color:
Material: Plastic+Metal
Package Contents:
5 x Microphone Module
Dettagli
| OPC | PWK9MDB |
|---|---|
| Marchio | Exogio |
| Codici | 6031666973661 (EAN) |
| Informazioni sul prodotto e sulla sicurezza |
Dati prodotto
| Height | 5cm |
|---|---|
| Width | 1cm |
| Length | 1cm |
| Weight | 0.0075kg |
| Colour | Blue |
| Material | Plastic+Metal |
Confronta i venditori per 5X SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Module 1.6-3.6V for Raspberry Pi
- Nuovo da 37,13 €
| Venditore | Recensioni | Garanzia | Resi | Prezzo | Consegna | Totale | Quantità |
|---|---|---|---|---|---|---|---|
|
Spedito da:
|
(115 recensioni) | - |
30 giorni
Resi gratuiti No
|
33,13 €
|
+4,00 € Delivery
Consegna stimata:
31 lug - 5 ago
|
37,13 €
|
Guadagna mentre fai acquisti con Cashback istantaneo su tutto.
Nessun trucco, nessun costo
- Accreditato sul tuo conto OnBuy
- Usali sul tuo prossimo acquisto
- Risparmialo o prelevalo
Diventa un Cashback VIP
Basta 1 acquisto per sbloccare offerte e vantaggi ancora più grandi