(10pcs) 2/5/10PCS Cloning Duplicator Key Fob A Distance Remote Control 433MHZ Clone Fixed Learning Code Rolling Code For Gate Garage Door

(10pcs) 2/5/10PCS Cloning Duplicator Key Fob A Distance Remote Control 433MHZ Clone Fixed Learning Code Rolling Code For Gate Garage Door Beskrivelse

Description: Specifications: Product: remote control Color: silver black Dimensions: 5.5*3*1.5cm Frequency:433MHz Working voltage: DC12V (27A battery a including) Operating Current: 8mA Modulation Mode: ASK (AM) The transmission power: 100mW Emission Distance: 50 to 100 m (proof) The encoding type: self Copy Uses: garage doors, motorcycles, car alarm products, home security products, short-range wireless remote control products, industrial control products Specifications: 1.Chips could be copied 2260(all manufacturers);2262(All manufacturers);PT2264, 5326(All manufacturers);SC5262, HT600, HT680, HT6207, HT6010, HT6012, HT6014, SMC918series,527(All manufacturers);1527(All manufacturers);2240(All manufacturers);HCS101, HCS200\HCS201(part code),HCS300\HCS301(), part single chip microcomputer.......... 2.Code cleaning method: At the same time, press and hold the two keys of unlock and lock (some cases have two keys of up and down) and the LED indicator light will enter the state of fast flashing. At this time, all the data in the memory will be cleared. After the data is cleared, the remote control will not light up no matter which key you press. 3. Copy method One hand keeps the original remote controller, while another keeps the copy remote control, the two remote controls should be placed as closely as possible (the ideal situation is to put the two remote controls on the desktop side by side with zero distance), respectively press down the copy button, when the LED indicator light flashes quickly after three flashes, this copy is successful, other key operating methods are the same. Some remote control has a smaller transmitting power, so the original remote control should be placed back to the copy remote control to be operated. For the presence of noise, it should avoid interference to operate, If the copy is not successful, it should recopy after clearing code. AttentionYour original remote control must be able to work and the same as our remote control frequency Notice: The essential condition for the selection of the remote control;the copyed remote control operates normal,chip is compatible and frequency is correct. Before buying,please make sure the copyed remote control operating frequency or choose & buy the frequency adjustable type remote control. Before buying,please confirm whether your remote control can be copyed or not. Our remote control can copy the fixed codes and learning codes rather than stealth cod Package Included: 2/5/10pcs* remote control