Automatic Flower Watering System DIY Science Experimental Tool Kit with R3 Development Board for Learning

Automatic Flower Watering System DIY Science Experimental Tool Kit with R3 Development Board for Learning Beskrivelse

The watering system device uses the R3 development board as the main control board. Equipped with a dedicated expansion board and PH2.0 sensor to avoid messy wire connections, build projects more easily and quickly, assembly and wiring are relatively simple, and performance is more stable!
Production type:manual assembly, screw fastening structure
Compatible development board:for development board
Power supply method: 1. Use TYPE-CUSB port power supply voltage (5V); 2. Use power supply voltage (DC7V-12V)
Others: onboard custom function button x1, spare expansion interface x1. Supported programming software:for ArduinolDE, for Mixly, for Ardublock, for Scratch.

This kit can achieve:
1. The D2 button switches between automatic mode and manual mode.
2. The LED light is used as an indicator light for the working status of the water pump.
3. Manually control the water pump for watering.
4. The soil moisture sensor controls the of the water pump.
5. The water level sensor is used to detect the remaining water volume. When the water level is too low, a water shortage warning is issued through a buzzer and pumping is stopped.
6. The LCD display shows the real- monitoring values of soil moisture and water level.
7. Remote monitoring is achieved through the module.
Name:Intelligent watering system device
Sensor: water depth sensor x1, soil moisture sensor x1
Actuator:active buzzer x1, LED light module x1
Display:LCD1602 LCD display x1
Basic input module:key module x1
Expansion board:HS--EXP1
Power module output:maximum 5V/800MA
Power interface input voltage range:6-12V
Power Supply:3 x AAA batteries(Not included batteries)
Note:Due to different production batches, the appearance and color of the components may vary, but it will not affect the use.
Colour:Wood Color
Material:Wood + Electronic Com