Automatic Irrigation Module DIY Kit Automatic Watering Module Soil Moisture Detection Automatic Water Pumping
På lager
Derfor vil du elske å handle hos OnBuy:
- Tjen Cashback på hvert kjøp – bruk det umiddelbart på din neste bestilling
- Gratis levering – på millioner av varer på hele nettstedet
- Kunder elsker oss – 126,000 anmeldelser med vurderingen “Utmerket”
Prisene for varer solgt av OnBuy inkluderer mva.
Rente- og gebyrfri delbetaling tilgjengelig
Se full produktbeskrivelse og detaljer
Levering: Standard (Gratis) | lør 20. - fre 26. jun
Solgt av: LLhappy
Returer: 30 dager
180 dagers betalingsbeskyttelse
Mest populære i Bilreléer
Sammendrag
- 1. Test the relay module: Connect the VCC of the relay module to 5V, connect GND to ground, connect IN to GND and the relay will jump. If IN is left floating, the relay will recover. If you repeat this, you can hear the relay's "stuck" sound.
- 2. Test the soil moisture sensor module: Connect the fork probe and the transmitter module with two Dupont lines. The transmitter module VCC is connected to 5V and GND is grounded. When powered on, the red power light is always on and the green (blue) indicator is The light flashes faintly once: insert the fork probe directly into the water, the green (blue) indicator light will turn on
- 3. Connect the red wire of the water pump to 5V, and the black wire to ground. The water pump works. Note that the test only takes 1 second. Do not expose it to the air for a long time.
- Automatic Watering DIY KIT
- Automatic Irrigation Module OIY
Automatic Irrigation Module DIY Kit Automatic Watering Module Soil Moisture Detection Automatic Water Pumping Beskrivelse
1. Test the relay module: Connect the VCC of the relay module to 5V, connect GND to ground, connect IN to GND and the relay will jump. If IN is left floating, the relay will recover. If you repeat this, you can hear the relay's "stuck" sound.
2. Test the soil moisture sensor module: Connect the fork probe and the transmitter module with two Dupont lines. The transmitter module VCC is connected to 5V and GND is grounded. When powered , the red power light is always and the green () indicator is The light flashes faintly once: insert the fork probe directly into the water, the green () indicator light will turn
3. Connect the red wire of the water pump to 5V, and the black wire to ground. The water pump works. Note that the test only takes 1 second. Do not expose it to the air for a long .
Due to different batches, the appearance, color and printed words of the product may vary, which will not affect the use.
Material: PCB
colour: As Shown
Package Contents:
1 x relay module
1 x Soil sensor
1 x Small water pump
1 x battery box
1 x USB power cable
1pcs x 50cm silicone hose
10 x Dupont cable
Detaljer
| OPC | PTRGWNN |
|---|---|
| Merke | Zandonà |
| Koder | 4713099789478 (EAN) |
Produktdata
| Height | 5cm |
|---|---|
| Width | 15cm |
| Length | 20cm |
| Weight | 0.1145kg |
| Colour | As Shown |
| Material | PCB |
Sammenlign selgere for Automatic Irrigation Module DIY Kit Automatic Watering Module Soil Moisture Detection Automatic Water Pumping
- Ny fra 128,44 kr
| Selger | Vurderinger | Garanti | Returer | Pris | Levering | Totalt | Antall |
|---|---|---|---|---|---|---|---|
|
Sendt fra:
|
(150 anmeldelser) | - |
30 dager
Gratis retur Nei
|
128,44 kr
|
+Free Delivery
Estimert levering:
20-26 jun
|
128,44 kr
|
Tjen mens du handler med umiddelbar Cashback på alt.
Ingen binding, ingen kostnad
- Utbetalt til OnBuy-kontoen din
- Bruk det på neste kjøpet ditt
- Spar den eller ta den ut
Bli en Cashback VIP
Bare 1 kjøp gir deg større rabatter og bedre priser