BME680 Environmental Sensor Module STEMMA QT/Qwiic Interface Temperature/Humidity/Air Pressure/Gas Detection

BME680 Environmental Sensor Module STEMMA QT/Qwiic Interface Temperature/Humidity/Air Pressure/Gas Detection Beskrivelse

Advanced sensor technology: The module uses the BME680 sensor to accurately measure temperature, humidity/pressure/gas, making it ideal for environmental monitoring and altitude detection projects. High-precision measurements: High-precision sensors provide real- updates environmental conditions, ensuring reliable data to improve project performance.
Compact and versatile: The module's compact design makes it ideal for DIY electronics projects, wearables, and weather stations. Its versatility is suitable for both hobbyist and professional applications. Easy to integrate: The module uses standard communication interfaces to seamlessly integrate into existing systems, making it quick and easy for developers of all skill levels to set .
BME680 environmental sensor module (temperature and humidity/pressure/gas four-in-one)
Interface type: STEMMA QT / Qwiic (I²C solder-free plug-in interface); Core functions; Four-in-one environmental monitoring: Temperature: Measuring range -40C ~ +85C, accuracy 1.0C; Humidity: Measuring range 0% ~ RH, accuracy 3% RH; Air pressure: Measuring range 300hPa ~ 1100hPa, accuracy 0.6 hPa (equivalent to 1 meter above sea level); Gas/VOC detection: Detection of volatile organic compounds (TVOC) and estimation of eCO₂ (indoor air quality indicator);
Interface advantages: Plug and : equipped with STEMMA QT/Qwiic 4-pin interface (GND/VCC/SCL/SDA), compatible with Adafruit, SparkFun, Seeed and other ecological chain devices.

No soldering: quickly connect to the development board (such as for , for Raspberry Pi, ESP32) through the JST SH cable, saving 90% of wiring .
Dual interface design:
4-pin Qwiic interface (default I²C address 0x77)
Compatible with traditional pin pads (support I²C/SPI switching)
Technical
Parameter Value
Operating voltage 3.3V (compatible with 5V logic level)
Communication protocol I²C (default) / SPI (jumper required)
Po