Produktbilder
Beklager, denne varen er midlertidig utsolgt.
Kitchen Cabinet Pulls Installation Jig Drill Mounting Template for Cabinet Knobs Cabinet Handles Drill for Drawer Pulls
Merke Typecat
Ny
181,34 kr
Lignende produkter vi tror du vil like
Vil du at vi skal gi deg beskjed når den er tilbake?
Beskrivelse og detaljer
Sammendrag
- Application Hole Center:Cabinet hardware with 2.5inch (64mm) 3inch (76mm) 3.5inch (90mm) 3.75inch (96mm) 4inch (102mm) 4.5inch (115mm) 5inch (128mm) 6.25inch (160mm) hole centers;The wide size scope of application can satisfied what you different needs.
- Easy Installation:The mounting template will help install cabinet pulls fast and easily.Clear measurement lines ensure drilling accurate installation holes.Find one of the pre-defined hole centers which worked best for your pulls,use a pencil to circle it,and it was easy to mark a drilling spot on all of the cabinets with a pencil.
- Drill Fearlessly:Once you've marked the hole center, fit the 3/16inch drill bit into your drill, but make sure the screws are 8/32inch firstly. And be sure to drill from front to back.If you do have splintering, it will be on the inside where nobody can see it.
- Cabinet Handles Drill
- for Drawer Pulls
Kitchen Cabinet Pulls Installation Jig Drill Mounting Template for Cabinet Knobs Cabinet Handles Drill for Drawer Pulls Beskrivelse
Application Hole Center:Cabinet hardware with 2.5inch (64mm) 3inch (76mm) 3.5inch (90mm) 3.75inch (96mm) 4inch (102mm) 4.5inch (115mm) 5inch (128mm) 6.25inch (160mm) hole centers;The wide size scope of application can satisfied what you different needs.
Easy Installation:The mounting template will help install cabinet pulls fast and easily.Clear measurement lines ensure drilling accurate installation holes.Find one of the pre-defined hole centers which worked best for your pulls,use a pencil to circle it,and it was easy to mark a drilling spot all of the cabinets with a pencil.
Drill Fearlessly:Once you've marked the hole center, fit the 3/16inch drill bit into your drill, but make sure the screws are 8/32inch firstly. And be sure to drill from front to back.If you do have splintering, it will be the inside where nobody can see it.
Colour:As Shown
Material:ABS
Package Contents:
1 * cabinet door drilling Template
1 * Drawer Drilling Template
1 * Drill Bit.
1 * punch
Detaljer
| OPC | PVGWYCV |
|---|---|
| Merke | Typecat |
| Koder | 4713658273233 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 5cm |
|---|---|
| Width | 14cm |
| Length | 20cm |
| Weight | 0.181kg |
| Colour | As Shown |
| Material | ABS |