Multi-mode Motorcycle Ignition for CG-125 Intelligent Control Remote C4H3

Multi-mode Motorcycle Ignition for CG-125 Intelligent Control Remote C4H3 Beskrivelse

Attention: If the original ignition CDI plug of your motorcycle is the same as the picture, and your motorcycle is a scooter equipped with GY6 engine, then the above products are plug and play for your motorcycle. If the original ignition CDI plug of your motorcycle is the same as the picture, but it is not a GY6 scooter, then you may need to exchange the sequence of cables for the motorcycle ignition CDI plug in order to use it (some motorcycles require cable replacement sequence, while others do not). Product Overview: This product is a revolutionary, high-performance intelligent motorcycle ignition (CDI). Its chip is compatible with both single- and dual-boss motorcycles and features a built-in strobe flasher module. It also comes with a power cable compatible with both DC and AC motorcycles. It comes with a smart remote control for remote switching between four driving modes. Core Functions and Features: 1. Intelligent Remote Control Four-Mode Switching: Anti-Theft Mode: Locks the ignition system, preventing the engine from starting and placing the vehicle in an armed state. Original Factory Mode: Restores the motorcycle to factory default settings, balancing fuel consumption and power. Competition Mode 1: Optimizes the ignition curve at low and mid-range speeds, increasing torque and delivering sharper acceleration. Competition Mode 2: Aggressive ignition advance angle settings maximize high-speed horsepower, designed specifically for competitive riding. a. Built-in strobe bursting flash turn signal function: Directly activate the turn signal switch (yellow lead), and the turn signal flashes in a fast-paced pattern. This provides an outstanding visual effect and enhanced warning. b. DC/AC Universal: Equipped with a 12V power cable (red lead), it offers maximum compatibility. c. Smart Remote Control: Remote control, convenient operation, with a maximum range of approximately 15-20 meters. Installation Steps: 1. Locate the original vehicle CDI: Find the original vehicle ignition (CDI), usually located under the seat or inside the side cover. 2. DC Motorcycles: Connect directly to the plug without connecting the red power cable. 3. AC Motorcycles: The original EXT port on the vehicle does not need to be connected. The red 12V power cable (red wire) must be connected to the positive terminal (+) of the battery. 4. Connect the strobe flasher cable (yellow wire) to the turn signal switch cable. 5. The remote control battery needs to be replaced regularly. 6. The remote control signal has a buzzer and LED for easy operation prompts. Safety Warning: Before installation, be sure to turn off the ignition lock switch and disconnect the negative battery cable to prevent short circuits. If you are not familiar with motorcycle electrical circuits, we recommend that you have a professional repairman perform the installation. Wish you a happy ride and enjoy the excellent experience brought by smart technology! Fitment: For SKUA150 CRF230 CS125 DM200 GY200 YABEN50 XR250R Dialin TMX155 XY150 For Honda CRF230F CRF230 For CRF ERZ 300S For Kayo K5 For Vento CROSSMAX250 CG150 CG200 Kymco People S 50 For Shineray 175 carburetor For CG99 2002 to later years for Dark Veloci Thunder 250 Zanella150 RX Z6 BERA BR200RR NEW DT200 CROSSMAX250 VGA Versus for GY6 50 80 110 125 150cc Moped Scooter ATV Go Karts for GY6 50cc, 80cc, 110cc, 125cc, 150cc, 175cc, 200cc, 250cc, 139QMB, 152QMI and 157QMJ based engines For XLR125 XLR 125 XL125 TITAN KS ML125 CBX200 XR200 FOR NX150 NX200 NX350 for Suitable motorcycle models:for Roketa, for Sunl, for Baja, for Kazuma, for Carroll Stream Eagle, for Taotao, for P