Produktbilder
Protective Case for Heltec Capsule Sensor V3 V3 Programming Fixture USB Interface for Secondary Development
Merke Zandonà
Ny
På lager
Derfor vil du elske å handle hos OnBuy:
- Tjen Cashback på hvert kjøp – bruk det umiddelbart på din neste bestilling
- Gratis levering – på millioner av varer på hele nettstedet
- Kunder elsker oss – 126,000 anmeldelser med vurderingen “Utmerket”
289,91 kr
404,55 kr
28 % rabatt!
GRATIS levering
1%
Tjen 2,90 kr med én gang
Les mer
Prisene for varer solgt av OnBuy inkluderer mva.
Rente- og gebyrfri delbetaling tilgjengelig
Se full produktbeskrivelse og detaljer
Levering: Standard (Gratis) | lør 20. - fre 26. jun
Solgt av: LLhappy
Returer: 30 dager
180 dagers betalingsbeskyttelse
Beskrivelse og detaljer
Sammendrag
- 1. The fixture is an accessory of Capsule Sensor V3, which can modify the underlying program of Capsule Sensor V3, can be used for secondary development and design, and has a USB interface.
- 2. Thanks to WirelessBoot technology, the Capsule Sensor V3 accessory is a good choice for capsule program modifications.
- 3. Take out the board inside the capsule, open the fixture and press the spring end, there will be one end of the 6 probes, use it to clamp the board corresponding to the six holes inside the capsule, and connect the USB interface at the other end, you can read the underlying program for secondary development.
- 4. Enhance your development capabilities with the Heltec Capsule Sensor V3 Programming Fixture.
- 5. This essential accessory is designed specifically for modifying and programming the Capsule Sensor V3, making it an ideal tool for developers looking to engage in secondary development.
Protective Case for Heltec Capsule Sensor V3 V3 Programming Fixture USB Interface for Secondary Development Beskrivelse
1. The fixture is an accessory of Capsule Sensor V3, which can modify the underlying program of Capsule Sensor V3, can be used for secondary development and design, and has a USB interface.
2. Thanks to WirelessBoot technology, the Capsule Sensor V3 accessory is a good choice for capsule program modifications.
3. Take out the board inside the capsule, open the fixture and press the spring end, there will be one end of the 6 probes, use it to clamp the board corresponding to the six holes inside the capsule, and connect the USB interface at the other end, you can read the underlying program for secondary development.
4. Enhance your development capabilities with the Heltec Capsule Sensor V3 Programming Fixture.
5. This essential accessory is designed specifically for modifying and programming the Capsule Sensor V3, making it an ideal tool for developers looking to engage in secondary development.
Colour:As shown
Material:plastic
Due to different batches, there may be differences in product appearance and printed text, which will not affect use
Package Contents:
1 * V3 Programming Fixture
Detaljer
| OPC | PRT7YCP |
|---|---|
| Merke | Zandonà |
| Koder | 6134130662341 (EAN) |
Produktdata
| Height | 2cm |
|---|---|
| Width | 6cm |
| Length | 9cm |
| Weight | 0.031kg |
| Colour | As Shown |
| Material | plastic |
Sammenlign selgere for Protective Case for Heltec Capsule Sensor V3 V3 Programming Fixture USB Interface for Secondary Development
- Ny fra 289,91 kr
| Selger | Vurderinger | Garanti | Returer | Pris | Levering | Totalt | Antall |
|---|---|---|---|---|---|---|---|
|
Sendt fra:
|
(150 anmeldelser) | - |
30 dager
Gratis retur Nei
|
289,91 kr
|
+Free Delivery
Estimert levering:
20-26 jun
|
289,91 kr
|
Tjen mens du handler med umiddelbar Cashback på alt.
Ingen binding, ingen kostnad
- Utbetalt til OnBuy-kontoen din
- Bruk det på neste kjøpet ditt
- Spar den eller ta den ut
Bli en Cashback VIP
Bare 1 kjøp gir deg større rabatter og bedre priser