RFID Electronic Cabinet Lock DIY for Wooden Drawer Cabinet, Ready for Use & Programmable

RFID Electronic Cabinet Lock DIY for Wooden Drawer Cabinet, Ready for Use & Programmable Beskrivelse

Suitable for wooden door less than 1-inch (2.5cm) thick.
The included keys are already set ready for use.
The lock is programmable, to reset, add or delete keys freely.
Two Unlock Modes: Single Unlock Mode, Dual Unlock Mode.
Powered by 2x AA 1.5V batteries (not included).

The batteries can last 8-12 months under normal use.
Unlock automatically shortly before batteries go dead.
The sound alarm will alert when the battery power is low.
Operation Instructions
Reset
Install 2x AA 1.5V Batteries. Press the Reset button until a long beep.
Set Admin Card
After resetting the lock, swipe a RFID card/fob, this first card is configured as the Admin Card.
Set User Card
Swipe the admin card. Then swipe new cards, which you want to add as user card within the beeps.
Delete Card
1. To delete all user cards: swipe the admin card 3 times.
2. To delete all admin and user cards: same as Reset.
colour:gray
Material:ABS + metal
size:Product size: 86 * 63 * 29mm

Package Contents:
1x Lock Body
1x
1x set Screws
1x set RFID Cards (1x card + 2x keyfobs)
1x Location Icon
Note: The lock will automatically unlock ( open) shortly before batteries go dead. Before that, low power alarm alerts. So, don't worry about being locked out.

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.