SKY2040PLUS 13-Key Arcade Game Controller Hitbox Street Fighter Controller Rodless Game Combat Stick Mechanical Button B

SKY2040PLUS 13-Key Arcade Game Controller Hitbox Street Fighter Controller Rodless Game Combat Stick Mechanical Button B Beskrivelse

SKY2040PLUS is a gamepad firmware for Raspberry Pi and other boards based the RP2040 microcontroller.
SKY2040 is compatible with for PC, for , for Android, for Raspberry Pi, for , for PS3 and for PS4.
Selectable input modes (XInput, DirectInput and for ).
Overclocked polling rate to 1000 Hz (1 ms) in all modes, with less than 1ms of input latency. Multiple SOCD cleaning modes - Neutral, Priority (a.k.a. Hitbox), Second.
Bootsel Mode: Bootsel Mode is the state of the board where firmware can be flashed onto the board. You will need to use this whenever there is an update or as part of the troubleshooting process. You can boot into Bootsel Mode by either holding S1 + S2 + buttons while plugging in the controller or by booting into the Web Configurator and then restarting in Bootsel Mode.

Input Priority:
Left and Right stick emulation via D-pad inputs
Per-button RGB LED support
PWM and RGB player indicator LED support (XInput only)
Saves options to internal memory
Support for 128x64 monochrome I2C displays using SSD1306, SH1106 or SH1107 display drivers.
/EX Key:
When the toggle handle is in the position, the EX/ key is the direction key, that is, there are two keys, which can control the direction according to personal habits.
When the toggle handle is in EX position, EX/ key is EX key, and EX initially defaults to key; Professional and technical personnel can customize the setting of any key (please be careful, this does not do technical guidance)
Input Modes:
To change the input mode, hold one of the following buttons as the controller is plugged in:
A for
B for XInput
X for DirectInput/for PS3
Y for PS4
Input mode is saved across power cycles.
Type:B:Transparent