XY-CD60L Battery Charging Control Module Full Power-Off Voltage Protection Under-Voltage Power-Off Protection Module

XY-CD60L Battery Charging Control Module Full Power-Off Voltage Protection Under-Voltage Power-Off Protection Module Beskrivelse

Charging mode IN: By setting the upper limit voltage and the lower limit voltage dn; when the battery voltage the lower limit voltage dn, the relay is turned , and the charger starts to charge the battery; when the battery voltage the upper limit voltage , the relay is turned off to complete an automatic charging; the relay is turned , IN flashes to indicate it is charging.
Discharge mode OUT: By setting the upper limit voltage and the lower limit voltage dn; when the battery voltage the upper limit voltage , the relay is turned and starts discharging; when the battery voltage is the lower limit voltage dn, the relay is turned off to complete an automatic discharge function; the relay is turned , OUT flashes, Indicates that it is discharging.
Note: This product is a simple voltage controller, the output is turned and off through a relay, it only plays the role of a and cannot change voltage.
Color: black
Material: PCB+ electronic components

Function Description:
1. Calculation of voltage percentage: battery voltage / (upper limit voltage - lower limit voltage)
2. Button function:
button: short press to display % and , long press for 5 seconds to modes, charging mode: IN, discharging mode: OUT
SET button: Short press to view the currently set parameters; long press the SET button to enter the parameter setting interface, set : voltage upper limit, dn: voltage lower limit, OP: conduction , dOP: delayed conduction (0-999 seconds) , FOP in discharge mode: forced (0-10 seconds)
DOWN button: Short press to turn off/ the relay enable (emergency stop function) after it is turned off, the LCD display is OFF, and the relay is disconnected

Package Contents:
1 x Battery protector