BT‑100 Car Bluetooth 5.0 Speakerphone Handsfree Wireless o Receiver Noise Reduction

Descrição de BT‑100 Car Bluetooth 5.0 Speakerphone Handsfree Wireless o Receiver Noise Reduction

1、Car's Bluetooth will automatically report the number after the incoming call, and it will automatically answer the number 3‑4 seconds after the number is reported. You can answer the private call with your mobile phone. 2、Built‑in large‑capacity battery, one full charge can be used continuously for 6 hours without interruption, standby time up to 21 days. 3、Bluetooth 5.0 chip, support a variety of smart devices with stable signal, effective transmission distance up to 10m/32.8ft. 4、When the car Bluetooth is disconnected from the mobile phone Bluetooth within 5‑10 minutes, the car Bluetooth will automatically shut down. 5、The phone can be used as long as it has Bluetooth and is compatible with most smart phone devices. 6、For DSP intelligent noise reduction, effectively distinguishing non‑human voice noise, and automatically reverse eliminate noise, more clear call.

Item Type: Car Speakerphone

Material: ABS

Color: As Pictures Shown

Weight: Approx. 97g/3.4ozBluetooth version: Bluetooth 5.0

Bluetooth Model: BT-100

Battery capacity: 300mAh

Operating range: 10 meters/32.8ft

Talk time: 20-24 hours

Output power: 4W

Standby time: About 500 hours

Voice prompt: English

Charging time: 2-3 hours

Device pairing: 8 pairing records can be memorized

Models: suitable for IOS /Samsung/Xiaomi, tablet, laptop and other smart devices with Bluetooth function

How to use:

Pairing: Before using the vehicle-mounted Bluetooth speaker for the first time, it must be paired with a mobile phone that supports Bluetooth function. The vehicle-mounted Bluetooth speaker can be connected with 2 mobile phones at the same time. If you only connect with one phone, you need to connect once. Here are the pairing steps:

(1) Put the vehicle-mounted Bluetooth speaker and mobile phone within 1 meter of each other.

(2) Enter the pairing mode (it is the pairing mode when the red and blue LED lights flash alternately)

Note: The machine will automatically enter pairing mode after starting up.

(3) Activate the Bluetooth function of the phone, so that the phone starts to guide the Bluetooth device (refer to the instructions of the phone for details).

(4) Select "Yet-Pro6" from the devices found by the mobile phone, and the vehicle-mounted Bluetooth speaker will be paired with the mobile phone. (Password "0000 "is required for pairing of some mobile phones.) After the pairing is successful, the voice will prompt" Complete pairing ", the vehicle-mounted Bluetooth speaker will enter the waiting state, and the blue LED light will flash every 3 seconds.

(5) At this time, you can receive and make calls through the car Bluetooth speaker.

Note: If the vehicle-mounted Bluetooth speaker is not paired 2 minutes after entering the pairing state, please turn off the vehicle-mounted Bluetooth speaker and pair it again according to the above steps.

The car Bluetooth speaker connects the phone

(1) Answer the phone: When the phone is called, the vehicle-mounted Bluetooth speaker domain] will emit a ring and voice prompt "incoming call", and short press the "answer" button for once to answer the call.

(2) Hang up the call: short press the answer button for one time during the call to hang up the call and the call ends.

(3) Automatic call back of the last call number: when the car Bluetooth speaker is on and the last call is made, short answer the "answer button" for two times, then the phone number of the last call will be automatically called.

(4) Volume adjustment: When the vehicle-mounted Bluetooth speaker is turned on, press the "- "and "+" keys to adjust the volume until the desired volume is reached.

1 x

Speaker

1 x Clip

1 x Charging Cable

1 x Manual