2 Pcs DC6-24V 1000W BLDC 3 Phase Brushless Motor Driver Hallless Motor Drive Board Speed Controller Regulator

Descriere 2 Pcs DC6-24V 1000W BLDC 3 Phase Brushless Motor Driver Hallless Motor Drive Board Speed Controller Regulator

Working voltage: 6-20V (limit 24V)
Drive current: rated 30A air cooling 50A
Maximum power: 1000W
Overcurrent protection: Yes
Locked- protection: Yes (after locked-, the current will automatically drop and run at intervals) Over-temperature protection: Yes (over-temperature power is halved)

Maximum speed: 224000 RPM (2 pole motor), 74000 RPM (6 pole motor), 40000 RPM (12 pole motor), 35000 RPM (14 pole motor).
Model Number: Motor Driver Board
Precautions:
1. Reverse connection of the positive and negative poles of the power supply the motherboard will cause permanent damage to some of the chips the board (current will not work for a few seconds)
2. There is sampling over-current protection at the output of the motor during normal operation. Because the power and current of the module are very , please do not artificially short-circuit the module when the module is not working normally. Once the short-circuit, the circuit may be burnt and the tube may burst, the first wiring test Please test with low current and low voltage. After ok, connect with high current and high voltage. Since it is a board module, please pay attention to the insulation of the wiring . It is strictly forbidden to touch the board parts
3. Do not connect the motor that is obviously inconsistent with module voltage, current, or power, to avoid inexplicable damage
Colour:As Shown
Material:PC+Plastic

Package Contents:
2 x 6-24V 1000W BLDC 3-Phase Brushless Motor Driver (Due to different product batches, the appearance may vary, which does not affect the use)