2.4G Wireless 2 Players for Arcade USB Arcade Zero Delay Joystick Encoder PCB Board for Diy Arcade Game Console Parts.
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 133,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (34,00 RON) | mar 8 - joi 10 sept.
Vândut de: Dopipoo
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Rezumat
- 2.4G Wireless 2 Players for Arcade Encoder PCB Board generally used in PC/computer games, multiplayer games, Android smart TVs, set-top boxes, various arcade game consoles, etc...
- 2 motherboards are all the same. The one who powers on first will have the P1 indicator light always on green, and the second PCB motherboard will have the P2 indicator light always on red. When the battery is low, the indicator light will slow down and give an alarm. The battery needs to be replaced.
- The motherboard usually uses two 5V/7V batteries with 3V power, and it is not recommended to use a 3.7V lithium battery. Long term use may burn out the main control chip. If you want to use a rechargeable motherboard, you need to order a rechargeable one.
- If the motherboard is powered on but not connected to the receiver, the red and green lights will flash slowly. After flashing for several tens of seconds, it will enter sleep mode. Press the MODE/START button to wake up the motherboard.
- The indicator light on the receiving head remains on when connected. Even if the game is not played, it will still enter sleep mode after 5-6 minutes. Press the MODE/START button to wake up the motherboard.
Descriere 2.4G Wireless 2 Players for Arcade USB Arcade Zero Delay Joystick Encoder PCB Board for Diy Arcade Game Console Parts.
2.4G Wireless 2 Players for Arcade Encoder PCB Board generally used in PC/computer games, multiplayer games, Android TVs, set-top boxes, various arcade game consoles, etc...
2 motherboards are all the same. The one who powers first will have the P1 indicator light always green, and the second PCB motherboard will have the P2 indicator light always red. When the battery is low, the indicator light will slow down and give an alarm. The battery needs to be replaced.
The motherboard usually uses two 5V/7V batteries with 3V power, and it is not recommended to use a 3.7V lithium battery. Long term use may burn out the main control chip. If you want to use a rechargeable motherboard, you need to order a rechargeable one.
If the motherboard is powered but not connected to the receiver, the red and green lights will flash slowly. After flashing for several tens of seconds, it will enter sleep mode. Press the MODE/START button to wake the motherboard.
The indicator light the receiving remains when connected. Even if the game is not played, it will still enter sleep mode after 5-6 minutes. Press the MODE/START button to wake the motherboard.
2.4G Wireless 2 Players Arcade Encoder PCB Board generally used in PC/computer games, multiplayer games, Android TVs, set-top boxes, various arcade game consoles, etc...
2 motherboards are all the same. The one who powers first will have the P1 indicator light always green, and the second PCB motherboard will have the P2 indicator light always red. When the battery is low, the indicator light will slow down and give an alarm. The battery needs to be replaced.
The motherboard usually uses two 5V/7V batteries with 3V power, and it is not recommended to use a 3.7V lithium battery. Long term use may burn out the main control chip. If you want to use a rech
Detalii
| OPC | PVBXFWV |
|---|---|
| Coduri | 4714239719362 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 2cm |
|---|---|
| Width | 5cm |
| Length | 7cm |
| Weight | 0.0185kg |
| Colour | Black |
| Material | PC+Plastic |
Compară vânzătorii pentru 2.4G Wireless 2 Players for Arcade USB Arcade Zero Delay Joystick Encoder PCB Board for Diy Arcade Game Console Parts.
- Nou de la 96,09 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(159 recenzii) | - |
30 zile
Retur gratuit Nu
|
62,09 RON
|
+34,00 RON Delivery
Livrare estimată:
8-10 sept.
|
96,09 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase