2X USB 3.1 Type C Front Panel Header Extension Cable 50 Cm, USB 3.1 Type E to USB 3.1 Type C Cable,Gen 2 10 Gbps Cable
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 126,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (Gratuit) | lun 22 - vin 26 iun.
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Rezumat
- [FEATURES]You can use this board to convert the motherboard's USB3.0 interface 19PIN to TYPE-E and install the TYPE-C on the front of the chassis through the chassis line extension.The type-C reversible design simplifies the connection and allows you to plug in any way without worrying about it being upside-down. Supports data transfer to and from all your USB-C devices at speeds of up to 10Gbps, and delivers 100W power supply.
- [HIGH QUALITY TPE MATERIAL FLAT CABLE]TPE material super thin flat cable is very flexible, this material cable can be bent and folded to 180 degrees thousands times without damageIt adopts 16-pin USB3.1 cable and four high-speed signal lines. The use of silver-plated material to reduce the impedance of the conductor, enabling you to enjoy a faster data transfer speed. The shielding layer are braided with high quality tin-plated copper wire, which makes the signal transmission more stable.
- [EXTENSION USB 3.1 CABLE] fast charging and superspeed transfer data from your USB A devices by using this cable. This enables you to connect phones, tablets, flash drives, mouse, hubs and other USB C peripherals to your laptops and chargers with normal USB. One side USB C 3.1 protocol for high speed data transfer up to 10Gbps and other functions and delivers 100W power supply.
- [SECURE CONNECTION & COMPATIBILITY]Compatible with both USB 3.0 or USB 2.0 devices when both motherboard USB 3.0 & USB 2.0 headers are connected. Motherboard supported - ASUS ROG MAXIMUS IX FORMULA,STRIX Z270I/Z270G.
- [The attached interface is USB3.0 19PIN TYPE-E 20PIN Adapter card]The interface is USB3.0 19PIN TYPE-E 20PIN, the connection is stable.Mounted to the PCI bracket, helps you easily connect the devices with type C interface. it's easy to hook up and install and its just an extension/port so no need to install drivers.
Descriere 2X USB 3.1 Type C Front Panel Header Extension Cable 50 Cm, USB 3.1 Type E to USB 3.1 Type C Cable,Gen 2 10 Gbps Cable
[FEATURES]You can use this board to convert the motherboard's USB3.0 interface 19PIN to TYPE-E and install the TYPE-C the front of the chassis through the chassis extension.The type-C reversible design simplifies the connection and allows you to plug in any way without worrying about it being upside-down. Supports data transfer to and from all your USB-C devices at speeds of to 10Gbps, and delivers 100W power supply.
[HIGH QUALITY TPE MATERIAL FLAT CABLE]TPE material super thin flat cable is very flexible, this material cable can be bent and folded to 180 degrees thousands times without damageIt adopts 16-pin USB3.1 cable and four high-speed signal lines. The use of silver-plated material to reduce the impedance of the conductor, enabling you to enjoy a faster data transfer speed. The shielding layer are braided with high quality tin-plated copper wire, which makes the signal transmission more stable.
[EXTENSION USB 3.1 CABLE] fast charging and superspeed transfer data from your USB A devices by using this cable. This enables you to connect phones, tablets, flash drives, mouse, hubs and other USB C peripherals to your laptops and chargers with normal USB. One side USB C 3.1 protocol for high speed data transfer to 10Gbps and other functions and delivers 100W power supply.
[SECURE CONNECTION & COMPATIBILITY]Compatible with both USB 3.0 or USB 2.0 devices when both motherboard USB 3.0 & USB 2.0 headers are connected. Motherboard supported - MAXIMUS IX FORMULA,STRIX Z270I/Z270G.
[The attached interface is USB3.0 19PIN TYPE-E 20PIN Adapter card]The interface is USB3.0 19PIN TYPE-E 20PIN, the connection is stable.Mounted to the PCI bracket, helps you easily connect the devices with type C interface. it's easy to hook and install and its just an extension/port so no need to install drivers.
Colour: black +
M
Detalii
| OPC | PTNN9P7 |
|---|---|
| Brand | Exogio |
| Coduri | 6032810425388 (EAN) |
Date despre produs
| Height | 4cm |
|---|---|
| Width | 9cm |
| Length | 12cm |
| Weight | 0.061kg |
| Colour | black & blue |
| Material | TPE + PC + metal |
Compară vânzătorii pentru 2X USB 3.1 Type C Front Panel Header Extension Cable 50 Cm, USB 3.1 Type E to USB 3.1 Type C Cable,Gen 2 10 Gbps Cable
- Nou de la 198,45 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(106 recenzii) | - |
30 zile
Retur gratuit Nu
|
198,45 RON
|
+Free Delivery
Livrare estimată:
22-26 iun.
|
198,45 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase