Imagini produs
2X ZK-PP2K PWM 3.3-30V 12V 24V Motor Speed Controller Regulator 8A 150W Adjustable
Nou
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 133,000 de recenzii cu evaluare “Excelent”
97,64 RON
131,81 RON
Reducere de 26%!
+47,95 RON livrare
1%
Câștigați 0,98 RON instant
Află mai multe
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (47,95 RON) | lun 14 - sâm 19 sept.
Vândut de: Zemaoxia
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Te-ar putea interesa și
Descriere & Detalii
Rezumat
- LED brightness adjustment, frequency, duty cycle can be adjusted. Motor speed adjustment, frequency and duty cycle can be adjusted. Drive the solenoid valve to pull and release, automatic cycle, delay output, cycle number (or infinite loop) can be set. Control equipment to turn on and off, do switch fatigue test, voltage sag and other tests to verify the reliability of customer equipment. Delay start load, delay time can be set, after the delay, it will be turned on or intermittently.
- 3.2 PWM mode (display has "%" for PWM mode) The factory default mode is PWM mode, FREQ+ and FREQ-key set frequency, DUTY+ and DUTY-button set duty cycle; short press STOP button control signal output or stop, stop output is 0, the screen displays "OUT" mark as There is output, otherwise it stops output; the default factory frequency is 1KHZ and the duty cycle is 50%.
- If you want to switch to PULSE mode, long press the SET button (more than 6 seconds), do not release, you will see the screen change, "%" disappears, it is PULSE mode.
- Colour: As shown. material: plastic
- 1. Highlights: 1.1 can directly drive LED, motor, solenoid valve and other loads
Descriere 2X ZK-PP2K PWM 3.3-30V 12V 24V Motor Speed Controller Regulator 8A 150W Adjustable
LED brightness adjustment, frequency, duty cycle can be adjusted. Motor speed adjustment, frequency and duty cycle can be adjusted. Drive the solenoid valve to pull and release, automatic cycle, delay output, cycle number (or infinite loop) can be set. Control equipment to turn and off, do fatigue test, voltage sag and other tests to verify the reliability of customer equipment. Delay start load, delay can be set, after the delay, it will be turned or intermittently.
3.2 PWM mode (display has "%" for PWM mode) The factory default mode is PWM mode, FREQ+ and FREQ-key set frequency, DUTY+ and DUTY-button set duty cycle; short press STOP button control signal output or stop, stop output is 0, the screen displays "OUT" mark as There is output, otherwise it stops output; the default factory frequency is 1KHZ and the duty cycle is 50%.
If you want to to PULSE mode, long press the SET button (more than 6 seconds), do not release, you will see the screen change, "%" disappears, it is PULSE mode.
Colour: As shown. material: plastic
1. Highlights: 1.1 can directly drive LED, motor, solenoid valve and other loads
1.2 Two modes can be selected:
PWM mode - frequency (continuous), duty cycle. Note that the number of pulses cannot be set in this mode, and the pulse is always emitted.
PULSE pulse mode - positive pulse width , negative pulse width , power- delay start , and number of pulses are adjustable.
1.3 With start and stop button, can control the output and stop of the signal
1.4 Wide voltage input 3.3-30V, 5.08mm terminal wiring
2. Technical parameters:
2.1 Working voltage: 3.3~30V (note that the positive and negative poles should not be reversed, otherwise it may burn out)
2.2 Frequency range: 1Hz~150KHz, the accuracy is about 2%. Motor speed control generally chooses 20KHZ
2.3 duty cycle range: 0-, 1% stepping
2.4 number of pulses: 1-9999, or infinite (dis
Detalii
| OPC | PXFQ6PG |
|---|---|
| Coduri | 6034247929934 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 2.5cm |
|---|---|
| Width | 4cm |
| Length | 8cm |
| Weight | 0.083kg |
| Colour | As shown |
| Material | Plastic |
Compară vânzătorii pentru 2X ZK-PP2K PWM 3.3-30V 12V 24V Motor Speed Controller Regulator 8A 150W Adjustable
- Nou de la 145,59 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(147 recenzii) | - |
30 zile
Retur gratuit Nu
|
97,64 RON
|
+47,95 RON Delivery
Livrare estimată:
14-19 sept.
|
145,59 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase