3X NuMicro ICP Programmer Nu-Link Nu Link Nuvoton ICP Emulator Downloader Support Online/Offline Programming M0/M4

Descriere 3X NuMicro ICP Programmer Nu-Link Nu Link Nuvoton ICP Emulator Downloader Support Online/Offline Programming M0/M4

In-Circuit programming target chip
Online/offline programming mode
Backup flash data of target chip (Ilf the target chip is not flash protected)
Backup offline flash data of Nu-Link dongle (if offline data has been unprotected)
Write software serials number (SN) to target chip

Limit the maximum programming count.
Data encryption for online/offline programming.
Batch mode for online/offline programming.
2 Preparing for ICP Programming Tool
2.1 System Requirements:
The hardware and software requirements for installing the ICP Programming Tool system are as follows:
PC/AT compatible machine with Pentium or higher CPU
XVGA(1024x768) color monitor
At least 512M RAM for best performance
At least 20M free disk space
Windows 2000/XP/Vista/7
2.2 Hardware Installation:
Step 1: Plug USB cable into the USB port of the ICP Programming Tool board.
Step 2: Connect the ICP Programming Tool board with ICE interface of DEV board.
2.3 Software Installation:
Please run the installer package to install the software.
Due to different product batches, the appearance may vary, which does not affect the use.
Colour:As Shown
Material:Plastic

Package Contents:
3 x NuMicro ICP programmer Kit