3X RS485 Modbus Relay PRO RS485 Interface Relay Modbus RTU Protocol Control Optocoupler Isolation

Brand Semoic
Nou

În stoc

De ce îți va plăcea să cumperi de la OnBuy:

  • Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
  • Livrare gratuită – la milioane de produse de pe site
  • Clienții ne iubesc – 126,000 de recenzii cu evaluare “Excelent”

Vezi descrierea completă și detaliile produsului

260,28 RON
351,84 RON Reducere de 26%!
Livrare GRATUITĂ
1% Câștigați 2,60 RON instant Află mai multe
Adaugă în coș

Prețurile articolelor vândute de OnBuy includ TVA.

Opțiuni de plată în rate fără dobândă disponibile

Vândut de Haven Home Living
Vânzător Profesionist
Vizitează magazinul
4.5k+ comenzi

Vezi descrierea completă și detaliile produsului

Livrare: Standard (Gratuit) | mie 17 - vin 19 iun.

Returnări: 30 zile

Protecție la plată pentru 180 de zile

Adaugă în coș

Cele mai populare în Adaptoare telefonice

Descriere & Detalii

Rezumat

  • 1. This design is a relay for industrial application scenarios. It uses Modbus RTU protocol control and 485 signal as the transmission mode. It supports multiple devices controlled by the same host. It can be well applied to industrial automation. With ABS shell and rail buckle, it can be better used in actual environment.
  • 2. The board is equipped with mature and stable 8bit MCU and SP3485 level conversion chip.
  • 3. Wiring instructions: The relay can be assigned an address in the 485 bus, ranging from 1-255. The corresponding instructions can be sent for the address of the relay, so that the relay receiving the instruction can open and close any controlled circuit.
  • 4. Note: When the relay is energized, the COM terminal and the NO terminal are connected and disconnected from the NC terminal. That is, load 1 works and load 2 does not work. When the relay is not energized or not connected to the power supply, the COM terminal and the NC terminal are connected and disconnected from the NO terminal. That is, load 2 works and load 1 does not work.
  • Industrial Control Board

Descriere 3X RS485 Modbus Relay PRO RS485 Interface Relay Modbus RTU Protocol Control Optocoupler Isolation

1. This design is a relay for industrial application scenarios. It uses Modbus RTU protocol control and 485 signal as the transmission mode. It supports multiple devices controlled by the same host. It can be well applied to industrial automation. With ABS shell and rail buckle, it can be better used in actual environment.
2. The board is equipped with mature and stable 8bit MCU and SP3485 level conversion chip.
3. Wiring instructions: The relay can be assigned an address in the 485 bus, ranging from 1-255. The corresponding instructions can be sent for the address of the relay, so that the relay receiving the instruction can open and close any controlled circuit.
4. Note: When the relay is energized, the COM terminal and the NO terminal are connected and disconnected from the NC terminal. That is, load 1 works and load 2 does not work. When the relay is not energized or not connected to the power supply, the COM terminal and the NC terminal are connected and disconnected from the NO terminal. That is, load 2 works and load 1 does not work.

Power supply voltage: 5-32V (the voltage is better to be greater than 6V for more stability)
Communication protocol: Support standard Modbus RTU protocol
Communication interface: Support RS485 interface, with 120R terminal resistance dip
Baud rate: 4800/9600/19200/38400, default 9600bps, support power-off saving
Output signal: relay signal
Due to different batches, there may be differences in product appearance and printed text, which will not affect use.
Colour:As Shown
Material:ABS

Package Contents:
3 x RS485 Modbus Relay PRO

Detalii

OPC PTRFVD7
Brand
Semoic
Coduri 6031396595249 (EAN)

Imagini produs

3X RS485 Modbus Relay PRO RS485 Interface Relay Modbus RTU Protocol Control Optocoupler Isolation 1
3X RS485 Modbus Relay PRO RS485 Interface Relay Modbus RTU Protocol Control Optocoupler Isolation 2
3X RS485 Modbus Relay PRO RS485 Interface Relay Modbus RTU Protocol Control Optocoupler Isolation

Date despre produs

Height9cm
Width8cm
Length13cm
Weight0.2835kg
ColourAs Shown
MaterialABS

Compară vânzătorii pentru 3X RS485 Modbus Relay PRO RS485 Interface Relay Modbus RTU Protocol Control Optocoupler Isolation

  • Nou de la 260,28 RON
Vânzător Note Garanție Retururi Preț Livrare Total Cantitate
Expediat din: Hong Kong
(223 recenzii)
-
30 zile
Retur gratuit Nu
260,28 RON
+Free Delivery
Livrare estimată: 17-19 iun.
260,28 RON
Adaugă în coș

Câștigați în timp ce cumpărați cu Cashback instant la orice produs.

Fără condiții ascunse, fără costuri

  • Plătit în contul dumneavoastră OnBuy
  • Folosiți-i pentru următoarea achiziție
  • Economisiți-l sau retrageți-l

Deveniți un Cashback VIP

O singură achiziție deblochează oferte și rate mai avantajoase

×

Așteaptă! Ai uitat
ceva...

Doar pe OnBuy primești Cashback instant! Introdu adresa ta de e-mail mai jos și îți vom trimite o copie a coșului pentru a economisi timp mai târziu.

Nu, mulțumesc, sunt bine deocamdată

Prin introducerea adresei tale de e-mail, vei fi adăugat automat în baza noastră de date, unde poți beneficia de oferte personalizate de Cashback și acces anticipat la cele mai bune promoții. Te poți dezabona oricând de la e-mailurile noastre, iar datele tale nu vor fi niciodată partajate cu terți. Consultă Politica de Confidențialitate și Termenii și Condițiile pentru mai multe informații.

×

Înainte să pleci...
Nu uita, pe OnBuy primești Cashback instant la toate produsele!

Vrei să beneficiezi de oferte personalizate și cele mai mari rate de Cashback? Înscrie-te la newsletter-ul nostru mai jos.

Nu, mulțumesc, sunt ok deocamdată

Poți renunța la e-mailurile noastre în orice moment și nu vom împărtăși niciodată datele tale cu nimeni. Consultă Politica de Confidențialitate și Termenii și Condițiile pentru a afla mai multe.

Această pagină a expirat.

Te rugăm să reîmprospătezi pagina pentru a continua cumpărăturile.

Reîncarcă și continuă