3X Tang 20K FPGA Development Board RISCV Linux for Retro Game Player
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 130,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (101,34 RON) | sâm 8 - vin 14 aug.
Vândut de: GCuppt
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Cele mai populare în Semiconductori pentru circuite
Rezumat
- Tang Nano 20K is a core board using GOWIN Semiconductor GW2AR-18 QN88. The chip has 20736 logical lookup tables (LUT4) and 15552 registers (FF). There are two PLLs inside and multiple DSP units. Supports 18-bit x 18-bit multiplication to speed up number operations.
- It has built-in low-latency 64Mbits SDRAM, making it easier to run the NES emulator and better able to run soft-core Linux systems.
- The onboard BL616 chip serves as the FPGA JTAG downloader and serial port for communication with the FPGA.
- The board uses a 27MHz crystal oscillator by default to multiply the clock required for HDMI-compatible display, and is also equipped with an MS5351 clock generation chip to generate a variety of required clocks at will.
- The onboard download chip has been upgraded to a USB2.0 HS interface, with the functions of high-speed JTAG download, serial communication, high-speed SPI reception, and precise clock configuration.
Descriere 3X Tang 20K FPGA Development Board RISCV Linux for Retro Game Player
Tang 20K is a core board using GOWIN Semiconductor GW2AR-18 QN88. The chip has 20736 logical lookup tables (LUT4) and 15552 registers (FF). There are two PLLs inside and multiple DSP units. Supports 18-bit x 18-bit multiplication to speed number operations.
It has built-in low-latency 64Mbits SDRAM, making it easier to run the NES emulator and better able to run soft-core Linux systems.
The onboard BL616 chip serves as the FPGA JTAG downloader and serial port for communication with the FPGA.
The board uses a 27MHz crystal oscillator by default to multiply the clock required for -compatible display, and is also equipped with an MS5351 clock generation chip to generate a variety of required clocks at will.
The onboard download chip has been upgraded to a USB2.0 HS interface, with the functions of high-speed JTAG download, serial communication, high-speed SPI reception, and precise clock configuration.
color:black
Material:PCB+electronic components
Different batches may have slight differences in appearance, but this does not affect the use.
Package Contents:
3 x Tang 20K Core Board
3 x data cable
6 x PIN
Detalii
| OPC | PWDZS89 |
|---|---|
| Coduri | 6031095916697 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 6cm |
|---|---|
| Width | 6cm |
| Length | 8cm |
| Weight | 0.1335kg |
| Colour | Black |
| Material | PCB+Electronic Components |
Compară vânzătorii pentru 3X Tang 20K FPGA Development Board RISCV Linux for Retro Game Player
- Nou de la 859,43 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(266 recenzii) | - |
30 zile
Retur gratuit Nu
|
758,09 RON
|
+101,34 RON Delivery
Livrare estimată:
8-14 aug.
|
859,43 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase