Imagini produs
4Set TMC2209 V2.0 Stepper Motor Driver Fit for 3 E3D V3 Control Board 3D Printer Parts Replace A4988 Support UART
Nou
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 128,000 de recenzii cu evaluare “Excelent”
113,08 RON
186,58 RON
Reducere de 39%!
+35,35 RON livrare
1%
Câștigați 1,13 RON instant
Află mai multe
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (35,35 RON) | vin 24 - joi 30 iul.
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Cele mai populare în Modulele de memorie ale imprimantei
Descriere & Detalii
Rezumat
- TMC2209 is a perfect alternative to upgrade the stepper motor driver of 3D printer. It is compatible with existing 3D printer electronics and can easily replace the TMC2208, A4988, and other stepper motor drivers. With its advanced functions such as silent operation, precise micro-stepping, and sensorless homing, it can significantly improve the performance of your 3D printer.
- The driver default current is 1.25A, with a maximum current of 2.5A, continuous and stable printing current can reach 1.8A, logic voltage of 3.3V / 5V, and input voltage of 5.5V - 28V. The micro-stepping capability can go up to 1/256, providing precise control over movement of the stepper motor.
- Adopting a noise free and high-precision chopping algorithm, the motor will not produce any sound during both motion and rest, making it very quiet during the printing process.
- The TMC2209 silent stepper driver is designed to have excellent heat dissipation and generate low heat. It has a large cooling area that helps to keep the temperature low even when working for extended periods of time. Compared to other stepper motor drivers, the TMC2209 can lower the heat generated by up to 30 percent.
- Perfect fit for MKS SGEN-L, supports UART mode, supports infinite bit return to zero, and is set through jumper caps.
Descriere 4Set TMC2209 V2.0 Stepper Motor Driver Fit for 3 E3D V3 Control Board 3D Printer Parts Replace A4988 Support UART
TMC2209 is a perfect alternative to upgrade the stepper motor driver of 3D printer. It is compatible with existing 3D printer electronics and can easily replace the TMC2208, A4988, and other stepper motor drivers. With its advanced functions such as silent operation, precise micro-stepping, and sensorless homing, it can significantly improve the performance of your 3D printer.
The driver default current is 1.25A, with a maximum current of 2.5A, continuous and stable printing current can reach 1.8A, logic voltage of 3.3V / 5V, and input voltage of 5.5V - 28V. The micro-stepping capability can go to 1/256, providing precise control over movement of the stepper motor.
Adopting a noise free and high-precision chopping algorithm, the motor will not produce any sound during both motion and rest, making it very quiet during the printing process.
The TMC2209 silent stepper driver is designed to have excellent heat dissipation and generate low heat. It has a large cooling area that helps to keep the temperature low even when working for extended periods of . Compared to other stepper motor drivers, the TMC2209 can lower the heat generated by to 30 percent.
Perfect fit for MKS SGEN-L, supports UART mode, supports infinite bit return to zero, and is set through jumper caps.
Colour:Photo Color
Material:Plastic
Package Contents:
4x TMC2209 V2.0 Stepper Motor Driver with Heat Sink
Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Detalii
| OPC | PWD2HKS |
|---|---|
| Coduri | 6031013653994 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 4cm |
|---|---|
| Width | 13cm |
| Length | 17cm |
| Weight | 0.035kg |
| Colour | Photo Color |
| Material | Plastic |
Compară vânzătorii pentru 4Set TMC2209 V2.0 Stepper Motor Driver Fit for 3 E3D V3 Control Board 3D Printer Parts Replace A4988 Support UART
- Nou de la 148,43 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(126 recenzii) | - |
30 zile
Retur gratuit Nu
|
113,08 RON
|
+35,35 RON Delivery
Livrare estimată:
24-30 iul.
|
148,43 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase