Sorry, this item is temporarily out of stock.

4X 3D Printer UCAN Board Based STM32F072 USB to CAN Adapter Support with for CAnable / CandleLight / Klipper Firmware

Name: 4X 3D Printer UCAN Board Based STM32F072 USB to CAN Adapter Support with for CAnable / CandleLight / Klipper Firmware
Brand: Bobotron
SKU: PWFW5XB
Availability: OutOfStock

Brand Bobotron

New

Produse similare care te-ar putea interesa

Adaptoare USB

For Mic Microphone Adapter Connector Mobile Phone Adapter for Interface Mobile Phone Device Type-C Adapter158,37 RONLivrare GRATUITĂ

USB-C Male to TOSLINK Female Connector Aluminum Shell SPDIF PCM Stereo Supports USB-C Audio Output

75,03 RONLivrare GRATUITĂ

Splitter USB C USB C la 2USB C cablu feminin Convertor USB C pentru căști USB C la USB C Splitter Convertor de transfer de date105,81 RONLivrare GRATUITĂ

10X 4K Dummy Plug DP Display Adapter EDID Headless Emulator Desktop for PC Video Card94,76 RONLivrare GRATUITĂ

Adaptor USB la CAN MKS CANable MKS CANable Pro140,55 RONLivrare GRATUITĂ

Ethernet Adapter for Fire TV Stick HD 480 Mbps RJ45 10/100 Mbps For New for Fire TV/ /Chromecast74,62 RONLivrare GRATUITĂ

140W Laptop Charger 5V 9V 20V 7.4x0.6mm Female to USB C Type C PD Power Adapter Converter Fast Charging Cable53,79 RONLivrare GRATUITĂ

ACR39U-NF Pocketmate II Card Reader (USB Type-C) for CAC and PIV Cards 3, SLE4442 SLE4428 Memory Cards201,37 RONLivrare GRATUITĂ

USB Cable for Exilim EX-S10 EX-S12 EX-Z80 EX-Z77 EX-Z2 EX-Z9 EX-Z90 EX-Z2000 EX-Z2200 EX-Z2300 TR200 TR100 TR15042,62 RONLivrare GRATUITĂ

Splitter USB cu 9 pini, Splitter pentru placa de bază, Splitter pentru antetul de interfață USB feminin

48,67 RONLivrare GRATUITĂ

Would you like us to let you know when it's back?

Adaugă în coș

Descriere & Detalii

Rezumat

UCAN is a small low-cost open source USB to CAN adapter, compatible with CANable hardware. The UCAN enumerates as a virtual serial port on the computer and acts as a serial-line for the CAN bus interface.
With the alternative Candlelight firmware, UCAN is enumerated as the native CAN interface on Linux.
The UCAN adapter is compatible with ARM-based embedded platforms such as for Raspberry Pi, for Raspberry Pi Zero, for ODROID, for BeagleBone, etc. At the same time, it can also be used as USB to CAN application on Klipper.
supports CANable
3D Printer UCAN Board

Descriere 4X 3D Printer UCAN Board Based STM32F072 USB to CAN Adapter Support with for CAnable / CandleLight / Klipper Firmware

UCAN is a small low-cost open source USB to CAN adapter, compatible with CANable hardware. The UCAN enumerates as a virtual serial port the computer and acts as a serial- for the CAN bus interface.
With the alternative Candlelight firmware, UCAN is enumerated as the native CAN interface Linux.
The UCAN adapter is compatible with ARM-based embedded platforms such as for Raspberry Pi, for Raspberry Pi Zero, for ODROID, for BeagleBone, etc. At the same , it can also be used as USB to CAN application Klipper.

Based STM32F072
Type-C USB socket
Supports CAN2.0A and B, baud rates to 1M
Compatible with CANable
Support with for CAnable / CandleLight / Klipper firmware
3-pin screw terminal: CANH, CANL, GND
Jumper to enter bootloader for firmware updates
Onboard 120R termination default or Jumper to enable/disable termination
type: UCAN Board
color:Black+green
Material:PCB+plastic+metal

Package Contents:
4 x UCAN Board