AD584K High Precision Voltage Reference Module Programmable 4CH DAC ADC Replace Voltage Reference Board Calibration
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 129,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (21,21 RON) | lun 27 - vin 31 iul.
Vândut de: Papishop
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Cele mai populare în Cabluri FDD
Rezumat
- 1. The battery is a 300mAH standard special battery, the voltage is 3.7V and the model is 14250
- 2. The charging and discharging interface is micro-USB; the voltage is DC5V
- 3. The benchmark is not in use. Fully charge in sequence every two months. The board has built-in charge management and charge and discharge protection. Note that the battery polarity must not be reversed.
- 4. The output interface is a 2mm banana socket, and there is an SMA output interface for calibration. Use HP3458A eight-and-a-half digits multimeter to calibrate (use after full preheating). Re-calibration calibration conditions, time and calibration value record card will be pasted on the benchmark, please keep it properly
- 5. Press and hold for 2 seconds to turn on the machine. When turning on, the four indicator lights will light up at the same time, and then output the 2.5V reference voltage. After turning on, short press the button to switch the gears, followed by 2.5V-5V-7.5V-10V and long press for three seconds To shut down, the voltage indicator will go out immediately after shutting down
Descriere AD584K High Precision Voltage Reference Module Programmable 4CH DAC ADC Replace Voltage Reference Board Calibration
1. The battery is a 300mAH standard special battery, the voltage is 3.7V and the model is 14250
2. The charging and discharging interface is micro-USB; the voltage is DC5V
3. The benchmark is not in use. Fully charge in sequence every two months. The board has built-in charge management and charge and discharge protection. Note that the battery polarity must not be reversed.
4. The output interface is a 2mm banana socket, and there is an SMA output interface for calibration. Use HP3458A eight-and-a-half digits multimeter to calibrate (use after full preheating). Re-calibration calibration conditions, and calibration value record card will be pasted the benchmark, please keep it properly
5. Press and hold for 2 seconds to turn the machine. When turning , the four indicator lights will light at the same , and then output the 2.5V reference voltage. After turning , short press the button to the gears, followed by 2.5V-5V-7.5V-10V and long press for three seconds To shut down, the voltage indicator will go out immediately after shutting down
Material:plastic
colour:yellow
Package Contents:
1 * Reference Module
Detalii
| OPC | PVXVXGM |
|---|---|
| Brand | Typecat |
| Coduri | 4711319736691 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 3cm |
|---|---|
| Width | 6cm |
| Length | 7cm |
| Weight | 0.0245kg |
| Colour | yellow |
| Material | plastic |
Compară vânzătorii pentru AD584K High Precision Voltage Reference Module Programmable 4CH DAC ADC Replace Voltage Reference Board Calibration
- Nou de la 278,39 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(430 recenzii) | - |
30 zile
Retur gratuit Nu
|
257,18 RON
|
+21,21 RON Delivery
Livrare estimată:
27-31 iul.
|
278,39 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase