Imagini produs
Compression Sleeve Puller & Remover for 1/2 Inch Compression Fittings, Nut & Ferrule Removal Tool Plumbing Tool
Nou
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 135,000 de recenzii cu evaluare “Excelent”
101,17 RON
166,93 RON
Reducere de 39%!
+40,00 RON livrare
1%
Câștigați 1,01 RON instant
Află mai multe
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (40,00 RON) | lun 12 - sâm 17 oct.
Vândut de: PPEART
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Descriere & Detalii
Rezumat
- No Damage To Walls, Copper or Supply Lines: This compression sleeve puller is engineered to remove leaking sleeves, nuts and ferrules from 1/2 inch copper water compression fittings without cutting or cracking pipes. Its precise fit protects surrounding walls and finish work, ideal for tight plumbing spaces.
- Works On Corroded & Frozen Supply Stops: Built from durable, corrosion‑resistant and wear‑resistant materials, this ferrule puller easily tackles severely corroded or frozen supply stops. Simply turn the lever to steadily extract the old compression sleeve from the pipe, reducing risk of breakage and extra repairs.
- Saves Time vs Cutting Old Pipes: When there is not enough exposed copper to cut off an old compression fitting, this angle stop puller quickly removes the existing compression ring and reforms the previously crimped copper pipe back into a clean, round shape. Greatly shortens project time and simplifies replacement work.
- Easy To Use Step‑by‑Step: First, remove the old compression fitting or angle stop. Next, place the pipe nut into the golden threaded mouth of the puller tool and tighten the screw. Confirm the ferrule puller is aligned with the pipe, then turn the handle about ten times. The tool will automatically pull off the nut and ferrule.
- Purchase With Confidence & Wide Use: Ideal for replacing quarter‑turn valves on dishwashers, sinks and toilets that use compression fittings. This sleeve remover tool is a smart addition to any plumber or DIY toolkit.
Descriere Compression Sleeve Puller & Remover for 1/2 Inch Compression Fittings, Nut & Ferrule Removal Tool Plumbing Tool
No Damage To Walls, Copper or Supply Lines: This compression sleeve puller is engineered to remove leaking sleeves, nuts and ferrules from 1/2 inch copper water compression fittings without cutting or cracking pipes. Its precise fit protects surrounding walls and finish work, ideal for tight plumbing spaces.
Works Corroded & Supply Stops: Built from durable, corrosion‑resistant and wear‑resistant materials, this ferrule puller easily tackles severely corroded or supply stops. Simply turn the lever to steadily extract the old compression sleeve from the pipe, reducing risk of breakage and extra repairs.
Saves vs Cutting Old Pipes: When there is not enough exposed copper to cut off an old compression fitting, this angle stop puller quickly removes the existing compression ring and reforms the previously crimped copper pipe back into a clean, round shape. Greatly shortens project and simplifies replacement work.
Easy To Use Step‑by‑Step: First, remove the old compression fitting or angle stop. Next, place the pipe nut into the golden threaded mouth of the puller tool and tighten the screw. Confirm the ferrule puller is aligned with the pipe, then turn the handle about ten times. The tool will automatically pull off the nut and ferrule.
Purchase With Confidence & Wide Use: Ideal for replacing quarter‑turn valves dishwashers, sinks and toilets that use compression fittings. This sleeve remover tool is a addition to any plumber or DIY toolkit.
Color: As Shown
Material: Aluminum Alloy
Package Contents:
1*Compression Ferrule Puller Tool 1*pair of gloves
Detalii
| OPC | PSPZF9B |
|---|---|
| Coduri | 4712912892999 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 10.5cm |
|---|---|
| Width | 10.5cm |
| Length | 17cm |
| Weight | 0.24kg |
| Colour | As Shown |
| Material | Aluminum Alloy |
Compară vânzătorii pentru Compression Sleeve Puller & Remover for 1/2 Inch Compression Fittings, Nut & Ferrule Removal Tool Plumbing Tool
- Nou de la 141,17 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(321 recenzii) | - |
30 zile
Retur gratuit Nu
|
101,17 RON
|
+40,00 RON Delivery
Livrare estimată:
12-17 oct.
|
141,17 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase