Imagini produs
Sorry, this item is temporarily out of stock.
CTB007 PRO OBD2 Breakout Box with LCD Display 16PINs Vrms, ECU Testing Diagnostic Tool
Brand Torribaly
New
Produse similare care te-ar putea interesa
Would you like us to let you know when it's back?
Descriere & Detalii
Rezumat
- Features: 1.12 V / 24 V Compatible Circuit Tester Robust design for passenger cars and commercial vehicles. 2 .Real-time OBD-II Pin Voltage Monitor (VRMS / true RMS)
- Power/ground integrity: e.g., pin 16 (+B) and pins 4/5 (grounds). Bus activity on CAN / K-Line: checks whether static/dynamic levels look reasonable; a green background indicates dynamic values. Pin assignment sanity-check: quickly validates expected wiring on retrofits or suspect harnesses-replacing basic VPP voltage checks.
- 120 Ω CAN Termination Switches Inserts a 120 Ω resistor across the CAN pair to compensate for missing termination during single-ECU or small bench networks, improving signal integrity and reducing reflections.
- Bench Testing Support Provides convenient connectivity for IGN/START activation or external wake-up tools so ECUs can be powered and exercised on the bench.
- Important Notes For professional use. Incorrect pin bridging or inappropriate termination can damage ECUs or wiring. Pins 3/11 are OEM-defined; only use the MS-CAN terminator when the vehicle actually implements CAN on these pins. The real-time voltage view is a quick health check and does not replace an oscilloscope for waveform analysis.
Descriere CTB007 PRO OBD2 Breakout Box with LCD Display 16PINs Vrms, ECU Testing Diagnostic Tool
Features: 1.12 V / 24 V Compatible Circuit Tester Robust design for passenger cars and commercial vehicles. 2 .Real- OBD-II Pin Voltage Monitor (VRMS / true RMS)
Power/ground integrity: e.g., pin 16 (+B) and pins 4/5 (grounds). Bus activity CAN / K-: checks whether static/dynamic levels reasonable; a green background indicates dynamic values. Pin assignment sanity-check: quickly validates expected wiring retrofits or suspect harnesses-replacing basic VPP voltage checks.
120 Ω CAN Termination Switches Inserts a 120 Ω resistor across the CAN pair to compensate for missing termination during single-ECU or small bench networks, improving signal integrity and reducing reflections.
Bench Testing Support Provides convenient connectivity for IGN/START activation or external wake- tools so ECUs can be powered and exercised the bench.
Important Notes For professional use. Incorrect pin bridging or inappropriate termination can damage ECUs or wiring. Pins 3/11 are OEM-defined; only use the MS-CAN terminator when the vehicle actually implements CAN these pins. The real- voltage view is a quick health check and does not replace an oscilloscope for waveform analysis.
Signal Status
Pin background flashing green = dynamic signal.
High/Low Voltage Audible Alarms
Low-voltage (slow beep):
12 V systems: < 11.8 V
24 V systems: < 23.6 V
High-voltage (fast beep):
12 V systems: > 15.5 V
24 V systems: > 31 V
Ground Status Indication
Pins 4 or 5 show OPEN when no ground is detected, and GND when a valid ground is present.
Quick Jumper Function (Technician Use Only)
Allows a trained technician to momentarily bridge selected OBD pins via current-limited paths for OEM-approved procedures (e.g., make-specific communication or synchronization tasks).
.Battery Replaceme
Detalii
| OPC | PX777MK |
|---|---|
| Brand | Torribaly |
| Coduri | 6032292782665 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 6cm |
|---|---|
| Width | 12cm |
| Length | 22cm |
| Weight | 0.54kg |
| Colour | As Shown |
| Material | Plastic |
Would you like us to let you know when it's back?
CTB007 PRO OBD2 Breakout Box with LCD Display 16PINs Vrms, ECU Testing Diagnostic Tool
New
Te-ar putea interesa și