Damaged Screw Extractor, Bolt Extractor Kit 33 Pieces with Magnetic Extension Bit Holder, Socket Adapter for Broken Screw and Bolt Stripped

Descriere Damaged Screw Extractor, Bolt Extractor Kit 33 Pieces with Magnetic Extension Bit Holder, Socket Adapter for Broken Screw and Bolt Stripped

Damaged Screw Extractor - screw remover is made of High-Speed Steel, higher hardness and durability, making it easier to remove damaged screws.
Widely Used - Basically meet all your needs for various screws extracting. Such as hex bolts, lag bolts, hex bolts, machine screws, wood screws, sheet metal screws and other screws. A screw extractor set solves most of your home's problems with screw repairs, including wall panels, wood and sheet metal bolts. Important: CAN NOT used the hammer drill mode! Please use electric hand drill and must be low speed during use!
How to Use the Screw Extractor? Drilling the Screw. Select a drill bit slightly smaller than the screw. Hold the drill bits to the screw or fastener you need to remove. The right one will be slightly less wide than the screw . When you find the right one, attach it to your drill.
the drill bit with the center of the screw. Place the drill bit in the divot you created earlier. Move slowly as you begin to drill. Too much force will damage the screw. Focus holding the drill bit steady so it drills straight down into the screw .
Drill a hole for the extractor. You will need to drill somewhere between 18 inch (3.2 mm) and 14 inch (6.4 mm) into the screw . The depth depends the screw extractor you have. Hold the extractor to compare it to the hole you drilled. If the extractor doesn't fit, keep drilling to widen the hole.

Color: Silver
Material: high speed steel
Pulling out the Screw
Insert the extractor into the drilled hole. The spiral end of the extractor goes into the hole. You can tap it with a hammer to make sure it's in there, but don't force it. The loose end should have a tap handle, which looks like a T, for you to hold onto. Twist the extractor counterclockwise until you can't turn it anymore.
Twist the extractor with a wrench or drill. Grip the top of the extractor with a wrench. Continue to twist it counterclockwise unt