Imagini produs
FBP100 Fan Blade Hub Puller and Blower Wheel Puller, HVAC Removal Tool, Replace 40852 AP3737541 TJMA-FB2 TB041
Brand Typecat
Nou
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 137,000 de recenzii cu evaluare “Excelent”
307,26 RON
445,87 RON
Reducere de 31%!
+10,20 RON livrare
1%
Câștigați 3,07 RON instant
Află mai multe
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (10,20 RON) | joi 12 - sâm 14 nov.
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Descriere & Detalii
Rezumat
- High-Grade Materials: The FBP100 fan blade hub puller and blower wheel puller is forged from high-strength, Its heavy-duty steel center shaft resists bending, impact, and wear, delivering long-term reliability even when tackling corroded, seized, or rusted blower wheels and stubborn fan hubs in tight service spaces.
- The FBP100 generates powerful torque and pulling force to remove stuck fan blades and blower wheels effortlessly. The matched alignment tool centers the puller before force application, avoiding lopsided pulling that cracks hubs or bends shafts. It cuts working time, lowers labor costs and prevents expensive part damage during HVAC repairs.
- This multi-purpose FBP100 puller substitutes 9 tool models including 40852, AP3737541, TJMA-FB2, TB041 and UP-1, removing the hassle of carrying various dedicated tools. Compact and dependable, it fits most fan hub disassembly work, perfectly suited for professional HVAC technicians and experienced DIY enthusiasts.
- The four-claw puller resolves typical HVAC repair troubles: immovable rusted parts, motor harm caused by hammering/prying, and deformed parts from unbalanced pulling. Its uniform surrounding clamping force safely detaches fan components in confined areas, safeguarding motor shafts, bearings and equipment shells from secondary damage.
- The all-in-one FBP100 kit contains puller main body, drive bolt, 8 set screws, 4 pulling hooks, wrench and spacer sleeve for instant use. Four simple operation steps: mount bolt, fasten set screws, tighten with wrench, twist bolt to pull hubs. Penetrating oil is recommended on rusted shafts for faster disassembly.
Descriere FBP100 Fan Blade Hub Puller and Blower Wheel Puller, HVAC Removal Tool, Replace 40852 AP3737541 TJMA-FB2 TB041
High-Grade Materials: The FBP100 fan blade hub puller and blower wheel puller is forged from high-strength, Its heavy-duty steel center shaft resists bending, impact, and wear, delivering long-term reliability even when tackling corroded, seized, or rusted blower wheels and stubborn fan hubs in tight service spaces.
The FBP100 generates powerful torque and pulling force to remove stuck fan blades and blower wheels effortlessly. The matched alignment tool centers the puller before force application, avoiding lopsided pulling that cracks hubs or bends shafts. It cuts working , lowers labor costs and prevents expensive part damage during HVAC repairs.
This multi-purpose FBP100 puller substitutes 9 tool models including 40852, AP3737541, TJMA-FB2, TB041 and -1, removing the hassle of carrying various dedicated tools. Compact and dependable, it fits most fan hub disassembly work, perfectly suited for professional HVAC technicians and experienced DIY enthusiasts.
The four-claw puller resolves typical HVAC repair troubles: immovable rusted parts, motor harm caused by hammering/prying, and deformed parts from unbalanced pulling. Its uniform surrounding clamping force safely detaches fan components in confined areas, safeguarding motor shafts, bearings and equipment shells from secondary damage.
The all-in-one FBP100 kit contains puller main body, drive bolt, 8 set screws, 4 pulling hooks, wrench and spacer sleeve for instant use. Four simple operation steps: mount bolt, fasten set screws, tighten with wrench, twist bolt to pull hubs. Penetrating oil is recommended rusted shafts for faster disassembly.
Color: As Shown
Material: Metal
Package Contents:
1 set of disassembly tools
Detalii
| OPC | PY97NPT |
|---|---|
| Brand | Typecat |
| Coduri | 6033810201866 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 5cm |
|---|---|
| Width | 16cm |
| Length | 20cm |
| Weight | 1.46057kg |
| Colour | As Shown |
| Material | Metal |
Compară vânzătorii pentru FBP100 Fan Blade Hub Puller and Blower Wheel Puller, HVAC Removal Tool, Replace 40852 AP3737541 TJMA-FB2 TB041
- Nou de la 317,46 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(139 recenzii) | - |
30 zile
Retur gratuit Nu
|
307,26 RON
|
+10,20 RON Delivery
Livrare estimată:
12-14 nov.
|
317,46 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase