For MKS Robin V1.2 Control Board with TFT35 Touch Screen for 3D Printers
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 136,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Prioritate (Gratuit) | mie 28 oct. - lun 2 nov.
Vândut de: BALURE
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Rezumat
- 1. Adopt 32-bit high-speed ARM chip as the main control chip and adopt self-developed firmware.
- 2. Equipped with TFT35 touch screen, simple operation interface and high sensitivity.
- 3. An external WIFI module is connected to the cloud to realize remote printing of the cloud model. And provide mobile apps for Android and lOS systems, supporting Chinese and English.
- 4. Cooperate with the shutdown module to realize the shutdown function.
- 5. Flexible motor drive base mode, which can support 4988, 8825 and all kinds of in-line drives, and support other external drives to meet your requirements of various drives.
Descriere For MKS Robin V1.2 Control Board with TFT35 Touch Screen for 3D Printers
1. Adopt 32-bit high-speed ARM chip as the main control chip and adopt self-developed firmware.
2. Equipped with TFT35 touch screen, simple operation interface and high sensitivity.
3. An external WIFI module is connected to the cloud to realize remote printing of the cloud model. And provide mobile apps for Android and lOS systems, supporting Chinese and English.
4. Cooperate with the shutdown module to realize the shutdown function.
5. Flexible motor drive base mode, which can support 4988, 8825 and all kinds of in- drives, and support other external drives to meet your requirements of various drives.
Upgrade the configuration firmware through the card, which is simple and convenient to operate.
The startup logo and all buttons can be designed by yourself.
to 15 custom command buttons can be supported.
Specially optimized heat dissipation.
Adopt high-quality MOSFET tube, which has better heat dissipation effect.
Adopt special power chip to support 12V-24V power input.
24V input can be accepted, and the hot bed current can be reduced to 1/4 under the same system power, which effectively solves the heating problem of hot bed MOS tube.
Support the function of breakpoint continuation, power-off saving, broken material detection and shutdown after finishing.
it can support full Chinese Gcode printing.
Colour:Black
Material:Electronic components
Package Contents:
1 * control panel
1 * display screen
Detalii
| OPC | PYGGD98 |
|---|---|
| Brand | Jojomino |
| Coduri | 6033153894176 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 20cm |
|---|---|
| Width | 15cm |
| Length | 15cm |
| Weight | 0.2545kg |
| Colour | Black |
| Material | Electronic components |
Compară vânzătorii pentru For MKS Robin V1.2 Control Board with TFT35 Touch Screen for 3D Printers
- Nou de la 426,47 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(409 recenzii) | - |
30 zile
Retur gratuit Nu
|
426,47 RON
|
+Free Priority Delivery
Livrare estimată:
28 oct. - 2 nov.
|
426,47 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase