Motherboard for RP2040 Raspberry Pi Core Board Compatible RP2 Raspberry Pi Micropython Multifunction Module,A
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 129,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (15,00 RON) | mar 28 - joi 30 iul.
Vândut de: CNNOTEPAD
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Rezumat
- The RP2040 microprocessor (MCU) integrates a dual-core ARM architecture Cotex-MO+ core, directly integrates 264KB of RAM internally, supports up to 16M QSPI external expansion Flash, and highly flexible I/O settings, including I2C, SPI, PIO (Programmable I/O).
- Dual-core ARM Cortex-M0+@ 133MHz, 264kB built-in SRAM distributed in 6 independent blocks, Max external QSPI Flash expansion, directly connected to the AHB bus, equipped Complete interpolator and integer divider, on-chip programmable LDO to generate core voltage, 2 on-chip PLL phase-locked loops for USB and core clock generation, 30 GPIO pins, 4 of which can be used as analog inputs.
- Peripherals : 2 serial ports/2 SPI/2 I2C/16PWM channels/USB 1.1 controller and PHY, supports host mode and slave mode/8 PIO state machine. Regarding the YD-RP2040 core board, YD-RP2040 is a core board circuit board produced by VCC-GND® Studio using the RP2040 microprocessor (MCU) issued by the British for Raspberry Pi Company. It is convenient for users to expand peripherals and design and build circuits.
- Light-emitting diode description: Power indicator light, red light, used to indicate power on status, USR LED, GPIO25, blue light, used for user programming control, RGB LED WS2812B, GPIO23, used for user programming control
- Key description: USR KEY, GPIO24, used for user programming input control BOOT KEY, used for boot download RST KEY: used to reset the system, or enter boot download mode with BOOT KEY
Descriere Motherboard for RP2040 Raspberry Pi Core Board Compatible RP2 Raspberry Pi Micropython Multifunction Module,A
The RP2040 microprocessor (MCU) integrates a dual-core ARM architecture Cotex-MO+ core, directly integrates 264KB of RAM internally, supports to 16M QSPI external expansion Flash, and highly flexible I/O settings, including I2C, SPI, PIO (Programmable I/O).
Dual-core ARM Cortex-M0+@ 133MHz, 264kB built-in distributed in 6 independent blocks, Max external QSPI Flash expansion, directly connected to the AHB bus, equipped Complete interpolator and integer divider, -chip programmable LDO to generate core voltage, 2 -chip PLL phase-locked loops for USB and core clock generation, 30 GPIO pins, 4 of which can be used as analog inputs.
Peripherals : 2 serial /2 SPI/2 I2C/16PWM channels/USB 1.1 controller and PHY, supports host mode and slave mode/8 PIO state machine. Regarding the YD-RP2040 core board, YD-RP2040 is a core board circuit board produced by VCC-GND Studio using the RP2040 microprocessor (MCU) issued by the British for Raspberry Pi Company. It is convenient for users to expand peripherals and design and build circuits.
Light-emitting diode description: Power indicator light, red light, used to indicate power status, USR LED, GPIO25, light, used for user programming control, RGB LED WS2812B, GPIO23, used for user programming control
Key description: USR KEY, GPIO24, used for user programming input control BOOT KEY, used for boot download RST KEY: used to reset the system, or enter boot download mode with BOOT KEY
Description:
About the advantages of using RP2040 chip
for Raspberry Pi, with its extremely cost-effective for Raspberry Pi computer board, has become one of the leading computer data manufacturers. Cost-effectiveness has always been the label of Raspberry Pi. It can simply be considered an unfamiliar controller. The performance index is high enough and the necessary peripherals are also av
Detalii
| OPC | PTQRZBK |
|---|---|
| Brand | Tlily |
| Coduri | 6032483761981 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 1cm |
|---|---|
| Width | 6cm |
| Length | 10cm |
| Weight | 0.007kg |
| Colour | As Shown |
| Size | 4MB no RGB |
| Material | PCB |
Compară vânzătorii pentru Motherboard for RP2040 Raspberry Pi Core Board Compatible RP2 Raspberry Pi Micropython Multifunction Module,A
- Nou de la 145,20 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(465 recenzii) | - |
30 zile
Retur gratuit Nu
|
130,20 RON
|
+15,00 RON Delivery
Livrare estimată:
28-30 iul.
|
145,20 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase