POE M.2 HAT+ Adapter with PoE Function for Raspberry Pi 5,Supports NVMe Protocol M.2 Solid State Drive,High-Speed Read
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 129,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (21,21 RON) | lun 3 - vin 7 aug.
Vândut de: Papishop
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Rezumat
- Applicable to for Raspberry Pi 5, support IEEE 802.3af/at network standards.
- Support NVMe protocol M.2 interface hard disk, high-speed reading and writing. GEN3 theoretical transmission speed 8Gbps, measured reading and writing speed is about 800MB/s.
- Applicable to for Raspberry Pi 5, can be connected to Pi 5 through 16PIN cable, based on Raspberry Pi 40PIN GPIO interface design, top lead pin, convenient access to other Raspberry Pi expansion boards.
- Onboard dual LED indicator. Working status indicator light, flashes when the hard disk reads and writes data; power indicator light, always on when powered on; the working status of the device is clear at a glance.
- Supports NVMe hard disk protocol, compatible with 2230/2242 size M.2 hard disks, supports Gen2 and Gen3 modes, and supports booting Pi 5 from SSD.
Descriere POE M.2 HAT+ Adapter with PoE Function for Raspberry Pi 5,Supports NVMe Protocol M.2 Solid State Drive,High-Speed Read
Applicable to for Raspberry Pi 5, support IEEE 802.3af/at network standards.
Support NVMe protocol M.2 interface hard disk, high-speed reading and writing. GEN3 theoretical transmission speed 8Gbps, measured reading and writing speed is about 800MB/s.
Applicable to for Raspberry Pi 5, can be connected to Pi 5 through 16PIN cable, based Raspberry Pi 40PIN GPIO interface design, top lead pin, convenient access to other Raspberry Pi expansion boards.
Onboard dual LED indicator. Working status indicator light, flashes when the hard disk reads and writes data; power indicator light, always when powered ; the working status of the device is clear at a glance.
Supports NVMe hard disk protocol, compatible with 2230/2242 size M.2 hard disks, supports Gen2 and Gen3 modes, and supports booting Pi 5 from SSD.
Supports PoE Ethernet power supply, only one network cable is needed to connect to the PoE device to enable for the Raspberry Pi to connect to the network and power it. (Network cable not included)
Note: for Raspberry Pi and hard disk are not included.
PoE power input: 37V ~57V input
Power output: GPIO pin header: 5V 5A (MAX)
Network standard: Support IEEE 802.3af/at PoE
(Different batches may have different printings, which will not affect the use)
Color:
Material: PCB
Package Contents:
1 * expansion board
1 set * accessories (accessory colors are random, specified colors are not accepted)
Detalii
| OPC | PVQN6NJ |
|---|---|
| Brand | Typecat |
| Coduri | 6031501353399 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 2cm |
|---|---|
| Width | 5cm |
| Length | 5cm |
| Weight | 0.069kg |
| Colour | Blue |
| Material | PCB |
Compară vânzătorii pentru POE M.2 HAT+ Adapter with PoE Function for Raspberry Pi 5,Supports NVMe Protocol M.2 Solid State Drive,High-Speed Read
- Nou de la 248,47 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(436 recenzii) | - |
30 zile
Retur gratuit Nu
|
227,26 RON
|
+21,21 RON Delivery
Livrare estimată:
3-7 aug.
|
248,47 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase