Wired Car OBD2 Scanner, Plug and Play Code Reader, Wired Car OBD2 Scanner, HD LCD Display Screen, Red1pc

Descriere Wired Car OBD2 Scanner, Plug and Play Code Reader, Wired Car OBD2 Scanner, HD LCD Display Screen, Red1pc

【I/M Readiness Function:】Our car diagnostic scanner tool comes with I/M Readiness function to check the operations of the Emission System on OBD2 compliant vehicles.It includes vehicle-specific number of monitors like misfire monitor, fuel system monitor,Comprehensive component monitor, Oxygen sensor heater monitor,EVAP system and etc.This scan tool to help get your vehicle ready to pass the annual smog check 【Retrieve Vehicle Infor】OBD2 scanner enables retrieval of the Vehicle Identification No. (VIN), Calibration ID(s), Calibration Verification Nos. (CVNs). This function is most useful to check whether the ECU matches your car. With on click VIN (Vehicle ID Number) and DTC buttons for quick check, you can easily determine causes of check engine light. 【Powerful Compatibility】Universal OBD2 Scanner works on MOST 1996 US-Based cars SUVs Light Trucks, 2000 EU-Based and Asian cars, vehicles with all OBD2 protocols CAN, ISO9141, J1850 VPW, J1850 PWM, KWP2000. Supports 5 Languages English, German, Dutch, Spanish, French. 【Easy to Operate】Equipped with a 2.5 feet long and heavy duty cable enables you to sit comfortably running diagnostic test. 6 Rubberized well responding buttons, the Up and Down button for scrolling the menu, the Enter and Exit button allow for navigation back and entering menu. Protocol: SAE J1850 PWM (41.6 baud) SAE J1850 VPM (10.4 baud) ISO 9141-2 (5 baud init, 10.4 Kbaud) ISO 14230-4 KWP (5 baud init, 10.4 Kbaud) ISO 14230-4 KWP (fast initialization, 10.4 Kbaud) ISO 14230-4 CAN (11-digit ID, 500 Kbaud) ISO 14230-4 CAN (29-bit ID, 500 Kbaud) ISO 14230-4 CAN (11-bit ID, 250 Kbaud) ISO 14230-4 CAN (29-bit ID, 250 Kbaud) Instructions for Use: 1. Turn off ignition switch. 2. Find the vehicle 16 pin data link connector (DLC). Different models of OBD interface have different positions. 3. Insert OBD II wire to vehicle DLC. 4. Turn on ignition switch. Engine stops or runs. 5. Press Return/Confirm button to enter diagnostic menu. A series of OBD2 protocol information will be displayed on the display screen, until the vehicle protocol is detected. Specification: Display: Badit, 128 * 64 pixel display Working temperature: 0~60 (32~140) Storage temperature: -20~70 (-4~158) Working current: 80mA External power supply: Vehicle batteries supply 9.0 to 16.0V Port Type: OBD 16 Pin Male Size: Length: 95.5 mm, width: 72.1 mm, height: 22.2mm Product includes:1x diagnostic scanner tool Colour:Red