Marknadsplatsen med Cashback Tjäna direkt på allt Fri frakt på miljontals produkter Högt betyg Utmärkta Trustpilot-recensioner Bli en Cashback VIP Högre räntor, bättre erbjudanden 30 dagars retur Plus köpskydd

Tyvärr är den här varan tillfälligt slut i lager.

2X FS2A 4CH AFHDS 2A Compatible Receiver PWM Output for Flysky I6 I6X I6S Transmitter

Liknande produkter som vi tror att du kommer att gilla

Fjärrstyrda delar & tillbehör

Vill du att vi meddelar dig när den är tillbaka?

Lägg i varukorgen

Beskrivning & information

Sammanfattning

1. Press and hold the key on the receiver and connect the power to the receiver. The blue light on the receiver flashing, get into binding mode.
2. Set the transmitter into bind mode (confirmed AFHDS 2A protocol). After getting into bind mode, the receiver light changes from flashing to slow flash.
3. Transmitter get out of bind mode, then the receiver blue light becomes bright. Indicates that the signal received is successful.
Failsafe settings:
FS2A Receiver

2X FS2A 4CH AFHDS 2A Compatible Receiver PWM Output for Flysky I6 I6X I6S Transmitter Beskrivning

1. Press and hold the key the receiver and connect the power to the receiver. The light the receiver flashing, get into binding mode.
2. Set the transmitter into bind mode (confirmed AFHDS 2A protocol). After getting into bind mode, the receiver light changes from flashing to slow flash.
3. Transmitter get out of bind mode, then the receiver light becomes bright. Indicates that the signal received is successful.
Failsafe settings:

The receiver can normally receive the transmitter signal, push the rocker to the failsafe set, long press the receiver bind button, the light flashes quickly several times and then always bright, failsafe settings is successful.
size:11*25*3mm
colour:black
Material:PCB

Package Contents:
2 * FS2A 4CH AFHDS 2A Compatible Receiver
2 * parts

Detaljer