Produktbilder
Sorry, this item is temporarily out of stock.
60X for Focus Mondeo Engine Undertray Cover Clips Bottom Cover Shield Guard
New
Liknande produkter som vi tror att du kommer att gilla
Would you like us to let you know when it's back?
Beskrivning & information
Sammanfattning
- 30 x screws PLUS 30 x plastic grommets. These are the correct torx srews so will be a tight fit and also not easily snap unlike - some of the cheap copies which also fit fairly loose.
- As used on the undertrays ( cover under the engine ) for many Focus MK2 MK3 and Mondeo MK3 MK4 models.
- NOTE: There is more fixings than just these but these are the most common to replace.
- MAKE SURE BEFORE YOU BUY it is these you need. Picture is very clear so compare your old fittings to the picture BEFORE YOU BUY.
- Plastic grommets are to fit 10mm x 8mm holes SO CHECK AND MAKE SURE you have 30 x8mm holes that you need these fixings for.
60X for Focus Mondeo Engine Undertray Cover Clips Bottom Cover Shield Guard Beskrivning
30 x screws 30 x plastic grommets. These are the correct torx srews so will be a tight fit and also not easily snap unlike - some of the cheap copies which also fit fairly loose.
As used the undertrays ( cover under the engine ) for many Focus MK2 MK3 and Mondeo MK3 MK4 models.
NOTE: There is more fixings than just these but these are the most common to replace.
MAKE SURE BEFORE YOU BUY it is these you need. Picture is very clear so compare your old fittings to the picture BEFORE YOU BUY.
Plastic grommets are to fit 10mm x 8mm holes SO CHECK AND MAKE SURE you have 30 x8mm holes that you need these fixings for.
Color: black + red
Material: ABS
Package Contents:
30 x Gaika
30 x Buckle
Detaljer
| OPC | PTHXFS5 |
|---|---|
| Koder | 4714140359398 (EAN) |
| Produkt- och säkerhetsinformation |
Produktdata
| Height | 9cm |
|---|---|
| Width | 6cm |
| Length | 9cm |
| Weight | 0.1605kg |
| Colour | Black & Red |
| Material | ABS |