12V Spot Module with Welding Pen Intelligent Spot Control Board Set for Lithium Battery 18650

12V Spot Module with Welding Pen Intelligent Spot Control Board Set for Lithium Battery 18650 Popis

18650 lithium spot welding machine, can weld 0.1-0.3mm, support 0.1-0.3mm thick nickel strip or steel strip.
Support farad capacitors and batteries, and the welding is firm.
12 MOS tubes, the spot welding current can reach 3600A.
3-segment pulse, 99 gears adjustment, simple operation and good effect.
Conductive performance and heat dissipation, can work continuously for a long . This version has a fan interface, which will be turned when the temperature exceeds 45 degrees.

There are fixed buttons and display the main board for easy adjustment.
Two-sided outgoing wires are convenient for spot welding, and the products are marked, so it is not easy to make mistakes. Wider voltage and wide selection of power sources make welding stronger and wider.
Product Name:18650 Lithium Electric Spot Welding Machine
Working voltage:6.5V-16V
Working current:Less than 20ma
Standby power consumption:Less than 0.5ma
Recommended temperature:-10-60
Welding current:3600A MAX
Display language:Chinese and English can be switched: (press "-+" at the same )
Welding mode:default automatic welding mode
Welding nickel sheet thickness:0.1-0.3mm (related to battery discharge )
connection attention:
1. Connect the positive and negative poles of the battery according to the product connection diagram.
2. The soldering pen and the battery connection wire should be locked with fixing screws, so as not to cause ignition and unreliable welding.
Note:
Installation guide not included, Please check as much as possible to make sure the item is what you need.
Tips:The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use.
Colour:As Shown
Material:POC