2.4G 12CH Remote Control Module with Type-C Charging for DIY Projects Wireless Receiver Board Motor Controller
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 128,000 hodnotení s “Vynikajúcim” hodnotením
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
K dispozícii sú aj bezúročné možnosti platby
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (10,10 €) | pon 20 - sob 25 júl
Predáva: SK Shopping center
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Najobľúbenejšie v Dosky plošných spojov
Zhrnutie
- 1. Powerful 7.4V power supply, with a motor peak current of 3.5A
- 2. Built-in Type-C charging, supports direct charging of 3.7V lithium batteries
- 3. On-board 5V buck converter, perfectly drives 180°/360° servos
- 4. Pair-by-pair coding ensures no frequency interference when multiple sets are used on the same field
- 5. 50-meter remote control range, 12-channel full-scale speed control
2.4G 12CH Remote Control Module with Type-C Charging for DIY Projects Wireless Receiver Board Motor Controller Popis
1. Powerful 7.4V power supply, with a motor current of 3.5A
2. Built-in Type-C charging, supports direct charging of 3.7V lithium batteries
3. -board 5V buck converter, perfectly drives 180/360 servos
4. Pair-by-pair coding ensures no frequency interference when multiple sets are used the same field
5. 50-meter remote control range, 12-channel full-scale speed control
Module Mode Switching Instructions
1. Power the remote control board and turn the . Press and hold the and K4 buttons simultaneously. The LED will turn off. After approximately 5 seconds, the LED will turn . At this point, tap the K1 button; the LED will flash. The number of flashes indicates the current mode. Once you have selected the desired mode, release the and K4 buttons. Note: During the mode adjustment process, you must keep buttons and K4 pressed down continuously until you reach the desired mode, then release them.
Regarding Remote Control Range
This module features a built-in 2.4 GHz antenna that cannot be modified. The tested range in open land areas is approximately 60 meters, and approximately 30 meters underwater. Ensure there are no objects emitting interfering signals near the antenna, such as batteries or various metals. Also, do not place the module inside a metal enclosure, as this will severely interfere with signal transmission.
Color: Black
Material: ABS
Package Contents:
1x Remote Control Module Kit
Podrobnosti
| OPC | PVTKVRV |
|---|---|
| Kódy | 6034089931959 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 10cm |
|---|---|
| Width | 10cm |
| Length | 20cm |
| Weight | 0.1kg |
| Colour | Black |
| Material | ABS |
Porovnajte predajcov pre 2.4G 12CH Remote Control Module with Type-C Charging for DIY Projects Wireless Receiver Board Motor Controller
- Nové od 20,40 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(248 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
10,30 €
|
+10,10 € Delivery
Odhadované doručenie:
20-25 júl
|
20,40 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy